2005 Ford F-250 Super Duty Lariat Crew Cab Pickup 4-door 6.0l on 2040-cars

Auto blog

Ford recalls 1.48 million F-150s for transmission, plus other models

Weeks after recalling more than 800,000 F-Series pickup trucks for a fire risk, Ford has issued another separate recall for approximately 1.48 million 2011-2013 F-150s for a transmission fault. The six-speed automatics could unexpectedly downshift into first gear without warning. Ford and Lincoln tangentially issued much smaller recalls for the Mustang, Continental, Nautilus, and Navigator. According to Ford, some 2011-2013 model year F-150 pickups with six-speed automatic transmissions could "experience an intermittent loss of the transmission output speed sensor signal to the powertrain control module." This could potentially cause the trucks to temporarily downshift, which could be dangerous if it occurs while driving. Of the 1.48 million affected trucks, 1.26 million are in the U.S. while 221,000 are in Canada. Thus far, Ford knows of five reported accidents involving the issue. To remedy the problem, owners can take their trucks to dealers to update the power control module software. Ford also issued recalls for about 4,350 2019 Mustangs, Lincoln Nautiluses, and Lincoln Navigators in the U.S. and Canada due to a possible fault with the instrument clusters. Although there have been no reports of accidents, Ford says the instrument panel clusters assemblies might be blank or not turn out when the vehicle is started. Additionally, Ford issued a third recall for 28,200 2017-2019 Lincoln Continentals in the U.S. and Canada. Ford says silicon contamination might build up inside the door latch motor, causing it to malfunction. As a result, the door latch might not always fully engage, and the doors could possibly open unexpectedly. Despite no reports of accidents, Ford will remove and replace door latch assemblies on all doors for those affected by the defect. If any of these apply to a vehicle you own, contact Ford to discuss whether it is included in any of these recalls and have the vehicle checked out at a Ford dealership.

2015 Ford Mustang prototype spotted on the street

Our trusty spy photographers have snapped the first photos of the 2015 Ford Mustang prototype out on public streets. With nearly every square inch of the machine covered in heavy camouflage, it's difficult to discern details, but we can see smallish horizontal headlamps at work in the coupe's nose. Ford has made it clear that modern lighting technology will allow the company to get away from large, expensive headlamp arrays in the near future, and the 2015 Mustang may very well be the first of the automaker's products to bow with the new tech. The philosophy was first displayed on the very attractive Evos Concept.
The extensive cladding doesn't extend all the way to the prototype's rockers in the instance, giving us a look at the heavily-sculpted sills. Overall, this test car looks considerably smaller than the current generation Mustang, and elements like a short front overhang and beefy dual-piston calipers give us plenty of hope for the future model. Of course, reports that the 2015 Mustang will bow with an independent rear suspension and EcoBoost power certainly don't hurt our feelings, either.

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.