2014 Ford F150 Xlt on 2040-cars

Auto blog

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video:

Landau yachts: The history of Lincoln's Designer Series

The Lincoln Designer Series was introduced in 1976, at the end of the imposing Mark IV Continental generation. Four big-name fashion designers of the era – all-American country clubber Bill Blass, psychedelic Italian pattern-maestro Emilio Pucci, venerable French jewelry-maker Cartier, and a la mode French fashionista Hubert de Givenchy – were asked to slather their elegance on LincolnÂ’s personal luxury coupe. This experiment was a wild success. According to documents uncovered in the Lincoln archives – with the incomparable guidance of official brand historian Ted Ryan – the Designer series “accounted for more than 27% of Mark IV sales” shortly after its introduction. It was such a runaway hit, that it continued on throughout the even larger Mark V generation (incidentally, the longest coupe ever produced by Ford Motor Company), and didnÂ’t really peter out on these big two-doors until the early 1990s.   But the true history of the series well predates the era of opera windows, crushed velour and wire wheel covers. “If you take a step back even further, when Ford purchased Lincoln in 1922, Edsel Ford was put in charge of the company. But more than that, he helped establish the first design studio at Ford,” said Ryan. The basic Model T didnÂ’t take much design. Lincoln was different. Edsel is famed for his quote. “Father wanted to make the most popular car, I wanted to make the best.” The specific genesis of the Designer Series, however, came along as a result of a long-term personal connection with the marqueÂ’s first chairman. “Edsel Ford had a relationship with Cartier, and correspondence going throughout the 1920s and '30s,” Ryan said. “His personal cards and stationery were always ordered from Cartier.” This enduring link wasnÂ’t formalized until the late 1960s. “I found in product development files, in 1967, that Ford had gone to Cartier for a special 1970 Cartier Continental coupe,” Ryan said. According to internal documents, this package would include unique interior leather/cloth/vinyl surfaces and trim, modified dials, and a Cartier jewelry box, as well as golden plating on the steering wheel ornament, dial face ornaments, keys, C-pillar ornaments, door monograms, and dashboard plaque. “Think of that. A car that never was, that could have been,” Ryan said, wistfully. Some Cartier magic did get glossed on Lincolns in the late 1960s.

Ford partnering with MIT, Stanford on autonomous vehicle research

Ask any car engineer what's the biggest variable in achieving fuel economy targets, and he'll tell you "the driver." If one human can't understand human driving behavior enough to be certain about an innocuous number like miles per gallon, how is an autonomous car supposed to figure out what hundreds of other drivers are going to do in the course of a day? Ford has enlisted the help of Stanford and the Massachusetts Institute of Technology to find out.
Starting with the automated Fusion Hybrid introduced in December, MIT will be developing algorithms that driverless cars can use to "predict actions of other vehicles and pedestrians" and objects within the three-dimensional map provided by its four LIDAR sensors.
The Stanford team will research how to extend the 'vision' of that LIDAR array beyond obstructions while driving, analogous to the way a driver uses the entire width of a lane to see what's ahead of a larger vehicle in front. Ford says it wants to "provide the vehicle with common sense" as part of its Blueprint for Mobility, preparing for an autonomous world from 2025 and beyond.