2014 Ford F150 on 2040-cars

Auto blog

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.

Ford cuts 950 Russian jobs on weak demand

The Russian auto market, in decline for the past year and further hit by the declining value of the ruble and recent sanctions over its annexation of Crimea, has forced Ford to cut jobs and shifts at two of its joint venture plants there. Around 700 of the 2,700 total workers who build the Russian-market Focus and Mondeo will be cut at the plant in Vsevolozhsk, near St. Petersburg as it drops to a single production shift. A second plant about 700 miles away in Yelabuga, in the Tartarstan region, will lose 250 workers. That plant builds seven vehicles, including the Explorer, Kuga and Edge.
The Moscow Times says Ford has been especially hit by the market decline, the overall market losing 5.5 percent in 2013 compared to the year before, but Ford sales dropping 18 percent in 2013 year-on-year. This year isn't going any better, with The Blue Oval posting a 21-percent decline through the first two months of 2014. That's why, though the Yelabuga plant builds the CUVs that customers are moving into, even it is facing cuts.
The job cuts in Vsevolozhsk come on top four-week plant shutdown planned so that the paint and body shops can go to one shift. In a statement, the company said, "Ford Sollers remains absolutely committed to the Russian market and is confident it has the right product plan, people and assets to deliver long-term profitable growth."

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.