2014 Ford F150 on 2040-cars

Auto blog

Ford recalls over 500,000 trucks and SUVs, including Explorer, F-150, and Lincoln Aviator

For the second time in a month, Ford is recalling the brand-new 2020 Explorer and 2020 Lincoln Aviator for minor safety issues. This recall, which also affects certain 2018-2020 Ford F-150s, 2019-2020 Ford F-Series Super Duty trucks, 2018-2019 Ford Explorers, and 2019-2020 Ford Expeditions, pertains to potentially faulty seat-back reclining mechanisms. In total, the recall touches 550,186 vehicles. A mechanical part meant for relaxation and comfort has the Ford Motor Company stressin'. Ford says potentially affected vehicles might be missing the "third pawl required for seat-back strength" in the reclining mechanisms on certain seats. Because of this, the seats might not properly keep a person in place during the event of a crash or otherwise.  In the F-150s, F-Series Super Duty trucks, 2018-2019 Explorers, and Expeditions, the recall affects vehicles with manual driver and/or front passenger seat-back recliners. On the 2020 Explorers and Lincoln Aviators, rear outboard seats with manual recliners are of concern. Of the more than 550,000 vehicles, 483,325 vehicles are in the United States, 58,712 are in Canada and 8,149 are in Mexico. Thus far, Ford is not aware of any injuries from the issues. Ford says it expects most vehicles will not need repair, but dealers will inspect the seat structures out of precaution. If fault is found, dealers will replace the seat structure altogether. For this recall, Ford's reference number is 19C07. Contact your dealer for more information. Featured Gallery 2020 Ford Explorer View 47 Photos Recalls Ford Lincoln Truck SUV

This 2,000-hp Mustang is in serious need of wheelie bars

The Ford Mustang on the right is drag racing with the standard technique. The Mustang on the left, driven by David Measell, is using a new "rear bumper only" technique that evidently surprised everyone at the South Georgia Motorsports Park strip - including Measell.
Measell said his outfit just bought the car the week before the event, noting that it has more than 2,000 horsepower. Speaking of his "flying" run, Measell said, "We turned it up to dip on down," by which he meant they turned up the power in order to get his time down. Turns out all that power and all that traction sent the nose straight up into the air almost as soon as the race began.
He told an interviewer afterward that this was his first race in a "regular car" since he normally drives a pro-mod. "I like my wheelie bars," he concluded. You can see how he got there in the video below.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.