2014 Ford F150 on 2040-cars

Auto blog

Watch NASCAR racer Brad Keselowski do a burnout... in a hotel conference room

A vast majority of hotels frown upon smoking inside the building these days, but Brad Keselowski doesn't follow the rules. During his introduction at the 2013 MiilerCoors Distribution Convention, the reigning NASCAR Sprint Cup champion smoked the tires of his Miller-sponsored Ford Fusion stock car, adding a pair of thick, black stripes to the carpeting of the Marriott World Center's conference room.
This definitely isn't a high-quality video, but it's the perfect vantage point to watch Keselowski lay down some rubber and receive a well-deserved standing ovation after pulling up in front of the crowd. Check out the short-but-sweet video posted below.

Former Ford president, Jaguar chairman Nick Scheele dead at 70

We have the privilege here at Autoblog of reporting a lot of good news, but it is our duty as well to report the bad news and sad news as well. And this is one of those occasions as the automotive industry mourns the passing of one of its leaders.
Nick Scheele was born in the UK in 1944 and joined the Ford Motor Company upon graduating from the University of Durham in 1966, staying within the Blue Oval's portfolio for the entirety of his career. After moving to North America in 1978, he rose through the ranks to become president of Ford's Mexican operations in 1988. After acquiring Jaguar, Ford appointed Scheele as its chairman.
Scheele subsequently acted as chairman of all of Ford's European operations, making difficult decisions to take the division out of the red and into the black. He briefly headed up Ford's North American division before he was appointed in 2001 as president and chief operating officer of the global automaker, working under CEO Bill Ford following the departure of Jacques Nasser departure and retaining the role until his retirement in 2005.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.