2012 Ford F150 Svt Raptor Supercrew 4x4 Off Road Racing Sync 411hp 6.2l V8 Auto on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Ford Mustang Shelby GT350R-C set to storm Watkins Glen

Ford is bringing its latest high-performance Mustang back to the track with the new 2016 GT350R-C, which will debut and race in this weekend's IMSA Continental Tire SportsCar Challenge race at Watkins Glen. The spiritual successor to the Boss 302R that's still taking part in the Continental Tire series today, the first GT350R-C will be campaigned by Multimatic Motorsports. It's had its fully independent suspension completely revised for the track, and it gets everything from new spring rates to new anti-roll bars to a lowered ride height. Like the road-going GT350, a 5.2-liter, flat-plane-crank V8 sits under the hood, although Ford didn't release any specifics on power output. In fact, details are in short supply. We're expecting some sort of sequential racing transmission, wildly enhanced brakes, and a thoroughly race-prepared cabin, although Ford hasn't released any info on that stuff. The Blue Oval also hasn't said anything about the aerodynamic package, but strangely, it looks more or less like what's featured on the standard GT350R. The front fascia and rear wing are pretty much identical, and even the side sills seem roughly similar to the production model. "Like so many Mustangs before it, the Shelby GT350R is a car born to race," Ford's director of global performance, Dave Pericak, said in the attached press release. "We're taking it to the track as the GT350R-C and we're ready to see what it can do against the best competition in the world." Scroll down for the official press release from Ford. And if you're so inclined, you can check out the GT350R-C's debut race this weekend at IMSA.com, with coverage starting at 12:25 P.M. If you prefer normal TV, Fox Sports 1 will get around to re-broadcasting the race on July 5 at 10:00 A.M. Related Video: Ford Performance Shelby GT350R-C to Make IMSA Competition Debut at Watkins Glen • All-new Shelby® GT350R-C embodies Ford innovation through performance as race car makes its competition debut this weekend at Watkins Glen • Shelby GT350R-C to compete in the remainder of the 2015 IMSA Continental Tire SportsCar Challenge with Multimatic Motorsports • Competition version of Shelby GT350R features all-new 5.2-liter flat-plane crankshaft V8 created to extend on-track performance DEARBORN, Mich., June 24, 2015 – There's no mistaking the wicked sound or aggressive looks of the all-new Shelby® GT350R-C that Ford announced today would see its first official track time at Watkins Glen this weekend.

Ford opens the doors on its Swedish rally skunkworks

It's always amazing to see how different kinds of racecars are made. Formula One racers are often constructed in modern architectural marvels that hint at some of the cutting-edge technology going into the racing. Conversely, rallying is all about sliding around on a varied course as fast as possible, but it often leaves a vehicle caked in mud. So it makes some sense Olsbergs MSE, or simply (OMSE) rally car shop in Nynashamn, Sweden, shows technological sophistication in a more down-to-earth setting. It builds Ford Fiesta ST racers for Global Rallycross there, and this new video gives viewers a tour through the work.
Former rally driver Andreas Eriksson runs OMSE. These days instead of racing, he and the company's 46 employees are building Ford racers from scratch. A ton of work goes into constructing each one, and according to Eriksson, it takes 400 hours to complete each body. At times, things are so busy that some of the technicians live in the shop in apartments that are on premises. There's even a restaurant to keep them fed. Sadly the dyno room is empty during this visit, though.
By the time OMSE is done, a rallycross car might resemble a Fiesta ST on the outside, but as you see in the video, it's a completely different beast underneath. Check out the work it takes to build one of them, and scroll down to read more about it in the official release.