2011 Ford F150 Xlt on 2040-cars

Auto blog

Ford recalling 433k cars for engines that don't shut off

Ford Motor Company has announced an enormous recall affecting 433,000 vehicles built between April 2014 and June 2015. There's a problem with the body control module in the affected vehicles that can prevent them from turning off, even if the key is removed from the ignition or stop/start button has been pressed. Individual models include the Focus and C-Max, both built at the Michigan Assembly Plant. The defective Foci were built between June 17, 2014 and June 12, 2015, while the C-Maxes were built between April 22, 2014 and June 12, 2015. Also affected are model year 2015 Escape CUVs, built at the Louisville Assembly Plant in Kentucky, between April 1, 2014 and June 12, 2015. As is usually the case, the overwhelming majority of vehicles – 374,381 – are registered in the United States, while the 52,180 are in Canada and 5,135 are in Mexico. The Blue Oval is not aware of any injuries or accidents due to this defect. Individual consumers, meanwhile, will need to report into dealers to have the body control module's software updated. Scroll down for the brief press release from Ford. Related Video: FORD ISSUES SAFETY COMPLIANCE RECALL IN NORTH AMERICA DEARBORN, Mich., July 2, 2015 – Ford Motor Company is issuing a safety compliance recall for approximately 433,000 vehicles in North America, including certain 2015 Focus, C-MAX and Escape vehicles, for an issue with the body control module. In these vehicles, it could be possible for the engine to continue to run after turning the ignition key to the "off" position and removing the key, or after pressing the Engine Start/Stop button. This is a compliance issue with FMVSS 114 regarding theft protection and rollaway prevention. Ford is not aware of any accidents or injuries associated with this issue. Affected vehicles include certain 2015 Focus vehicles built at Michigan Assembly Plant from June 17, 2014, through June 12, 2015; certain 2015 C-MAX vehicles built at Michigan Assembly Plant from April 22, 2014, through June 12, 2015; and certain 2015 Escape vehicles built at Louisville Assembly Plant from April 1, 2014, through June 12, 2015. There are 432,096 vehicles in North America, including 374,781 in the United States and federalized territories, 52,180 in Canada and 5,135 in Mexico. Dealers will update the body control module software at no cost to the customer.

Ford Explorer, Expedition next to go aluminum?

Ford made some serious waves when it unveiled the latest F-150. Instead of making its bodywork out of steel, like just about every other truck on the market, Ford went with aluminum. And you can bet the F-150 won't be the last Ford model to go with the lightweight alloy construction, either.
Our compatriots at Edmunds report that Dearborn is considering replacing two of its most popular SUVs with aluminum versions. One candidate is the Expedition, which would make sense considering that the current model (like the two preceding generations and the fullsize Bronco before it) is based on the F-150's underpinnings. Another is the Explorer, which was traditionally based on the Ranger pickup but went with a car-like unibody chassis in its current iteration. If the Explorer does go the way of aluminum, don't expect it to be a part of its very next update, which is likely due too soon for such major changes.
It would stand to reason that, if the Expedition were to go aluminum, so would the next-generation Lincoln Navigator. Ditto the MKT together with the Explorer. But those aren't likely to be the only models in contention for aluminum construction. Like any other automaker, Ford is under pressure to steadily reduce its carbon emissions and improve its fuel economy figures, prompting it to look at a whole range of measures - including more efficient engines, lower rolling-resistance tires, active aerodynamics and lightweight construction. Expect aluminum to play a big part in that equation moving forward.

Ford to add Android Auto and CarPlay to 2016 SYNC 3 cars via update

Ford is updating a large number of 2016 model year cars equipped with SYNC 3 infotainment software, adding Android Auto and CarPlay to the vehicles with a free, over-the-air update via Wi-Fi, or using either USB or going through their dealer. The upgrade will be available for around 800,000 vehicles in total, giving a huge number of Ford car owners the chance to get big infotainment improvements without having to buy a newer model car. The OTA update option is also a big step for Ford – it's the company's first for software ever, and it's one of the major reasons that Ford recently hired around 400 new mobile smartphone engineers, the company tells me. For CarPlay, users will still also need to upgrade their vehicle's USB hub to make this work (which will also incur a dealer visit and a cost), but for those on Android, all that's required is a simple software installation. The USB install method is also faster, but the Wi-Fi update option is the start of the company's efforts to really increase its OTA update program, which will be used for security improvements as well as infotainment bumps. Even with a dealer visit and hardware upgrade for CarPlay, this sounds like a worthwhile thing for 2016 vehicle owners to do. CarPlay and Android Auto are huge upgrades vs. most in-car software, offering navigation and entertainment options that follow you from your phone to your car. Retroactively offering this kind of thing to car owners is a definite change in tone for carmakers, since they typically use these kinds of things as incentives to get people interested in vehicle model updates. But as data becomes increasingly important to automakers as a business, it makes sense to encourage greater in-car use of devices.Written by Darrell Etherington for TechCrunchRelated Video: Auto News Ford Lincoln Technology Infotainment android