2003 Ford F150 Lariat on 2040-cars

Auto blog

These horribly misguided front-drive design studies nearly became the Mustang

As we eagerly await the unveiling of the all-new sixth-generation Mustang, Ford has been giving us some great information over the past few months showing what has gone into shaping its venerable pony car. As many changes as the Mustang has gone through in its 50 years, though, it appears the fourth-gen model played a decisive and pivotal role in the car's future.
As is part of Mustang lore, the front-wheel drive Ford Probe was originally developed as a next-generation Mustang in the Eighties before cooler heads prevailed. The Blue Oval has just released a handful of images showing how bad things could have been - including a full-scale clay model of a front-wheel-drive Mustang (shown above). Fortunately, the FWD Mustang plan was scrapped and Ford went to work designing a rear-wheel-drive replacement for the Fox Body Mustang, with three design studies making it far enough to become full-scale models. These include the soft "Bruce Jenner" Mustang, the over-the-top "Rambo" Mustang and the middle-ground "Arnold Schwarzenegger" Mustang, which finally became the basis for the 1994 'Stang.
By early 1991, the design language of the fourth-generation Mustang had been worked out, and the rest, they say, is history. Scroll down for the fascinating press release telling the story of the fourth-gen Mustang, and be sure to check out the gallery of horribly misguided sketches and various design studies that were all on the table in the late 1980s.

8 automakers, 15 utilities collaborate on open smart-charging for EVs

We're going to lead with General Motors here. GM is one of eight automakers working with 15 utilities and the Electric Power Research Institute (EPRI) at developing a "smart" plug-in vehicle charging system. Why did we start with GM? Because it's the first automaker whose press release we read that mentioned the other seven automakers. Points for sharing. For the record, the collaboration also includes BMW, Toyota, Mercedes-Benz, Honda, Chrysler, Mitsubishi and Ford. The utilities include DTE Energy, Duke Energy, Southern California Edison and Pacific Gas & Electric. The idea is to develop a so-called "demand charging" system in which an integrated system lets the plug-ins and utilities communicate with each other so that vehicle charging is cut back at peak hours, when energy is most expensive, and ramped up when the rates drop. Such entities say there's a sense of urgency to develop such a system because the number of plug-in vehicles on US roads totals more than 225,000 today and is climbing steadily. There's a lot of technology involved, obviously, but the goal is to have an open platform that's compatible with virtually any automaker's plug-in vehicle. No timeframe was disclosed for when such a system could go live but you can find a press release from EPRI below. EPRI, Utilities, Auto Manufacturers to Create an Open Grid Integration Platform for Plug-in Electric Vehicles PALO ALTO, Calif. (July 29, 2014) – The Electric Power Research Institute, 8 automakers and 15 utilities are working to develop and demonstrate an open platform that would integrate plug-in electric vehicles (PEV) with smart grid technologies enabling utilities to support PEV charging regardless of location. The platform will allow manufacturers to offer a customer-friendly interface through which PEV drivers can more easily participate in utility PEV programs, such as rates for off-peak or nighttime charging. The portal for the system would be a utility's communications system and an electric vehicle's telematics system. As the electric grid evolves with smarter functionality, electric vehicles can serve as a distributed energy resource to support grid reliability, stability and efficiency. With more than 225,000 plug-in vehicles on U.S. roads -- and their numbers growing -- they are likely to play a significant role in electricity demand side management.

Ford Focus RS configurator hits the Internet

Ford made waves yesterday when it drooped the performance and pricing details on the new Focus RS. Perhaps keen to keep the momentum going, the Blue Oval has launched the configurator for its new fire-breathing hot hatchback. As configurators go, this is a lot like the Ford's other build-your-own tools, only it's even more limited. The total list of options on the new Focus RS is quite light. You can pick from one of four colors, including the stylish Nitro Blue shown above, while there are just two interior upholstery schemes – partial black leather and full black leather for the standard Recaro seats. Your decision there will ultimately inform just how pricey your Focus RS will get. Opt for the full leather interior and you'll be stuck with the so-called RS2 package, which adds heated, powered front seats, a heated steering wheel, heated mirrors, and navigation to the standard SYNC3 infotainment system. Oh, and it'll also drive the price up by $2,785. Other options include a handsome set of 19-inch wheels, with the option of ultra sticky Michelin Pilot Sport Cup 2 tires. The wheels alone are a $1,395 option while adding the tires runs the price up $595, which is a bargain considering how pricey 19-inch PS Cup 2s are. The final option is a simple sunroof, priced at just $895. As you can see above, we've built our ideal Focus RS, finished in Nitro Blue with the 19-inch wheels, RS2 package (we live in Michigan, after all) and standard Michelin rubber. Yep, we passed on the more aggressive tire, with blame going to replacement costs. The total price comes to $41,480. Head on over to Ford's website and build your very own Focus RS, and then head back here and let us know how you optioned it, down in Comments. Related Video: