2003 Ford F-150 Xlt Triton 4x4 on 2040-cars

Auto blog

Ford announces recall of 220,000 units in three different actions

Ford has announced three separate recalls affecting 220,000 vehicles built between model years 2011 and 2015. By far the biggest affects just under 213,000 Ford Explorer and Police Interceptor Utility SUVs from MY2011 through 2013. In these vehicles, a spring in the doorway handle could be come unseated, Ford reports, causing the doors to open in a side-impact accident. The affected vehicles were built over a wide range of dates, starting with February 1, 2011 and November 30, 2012. As usual, the majority of the 212,911 vehicles were sold in the US market – 194,484 vehicles, in fact, while Canada and Mexico split the remainder, with 12,392 and 6,035, respectively. The other two recalls focus on specialty vehicles, with Ford recalling 6,500 F-Series Super Duty ambulances and emergency trucks from model years 2011 to 2015. In the case of the 2014 and 2015 F-Series, only trucks with the 6.7-liter turbodiesel are affected. These trucks may have faulty exhaust gas sensors, which according to Ford, could cause the trucks to think they're in a high-temperature situation. The trucks in questions were built at Ford's Kentucky truck plant between February 22, 2010 and February 1, 2015. Finally, the Blue Oval is recalling 1,725 specialty Lincoln MKT crossovers from MY2013 to 2015. These include limos and hearses built between March 6, 2012 and March 4, 2015. Affected MKTs may have a faulty vacuum pump relay that could cause a fire under the hood. In the case of the Explorers, dealers will inspect all four door handles and repair them as needed. The Super Duty's will get software updates, while the MKTs will have the vacuum pump relays replaced outright. A pair of MKT fires has been the only reported incident caused by the recalled components, while the company is unaware of any injuries or deaths. Scroll down for the official press release from Ford. Related Video: FORD ISSUES THREE SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., March 25, 2015 – Ford is issuing three safety recalls in North America. No accidents or injuries are attributed to these conditions. Details are as follows: Ford issues safety recall for certain 2011-2013 Ford Explorer and Ford Police Interceptor Utility vehicles for interior door handle issue Ford is issuing a safety recall for approximately 213,000 2011-2013 Ford Explorer and Ford Police Interceptor Utility vehicles in North America (actual 212,911) for an issue with the spring that controls the interior door handles.

Ford recalls 434k vehicles for several unrelated issues

It seems that the hard winter in much of the country has been as rough on some Fords as it has on many people. The Blue Oval is recalling roughly 434,000 vehicles in two separate recalls, and one of them partially caused by the salt used to melt the snow on roads.
The first recall covers 385,750 2001-2004 Escape models in the Midwest, Northeast and Canada because a subframe could rust and eventually fail. This is partially due to the road salt used in those areas, and about 349,000 of the affected vehicles are in the US. To remedy the problem, dealers are installing a reinforcement cross brace on the frame to strengthen them. There has been one crash caused by the failure but no injuries. According to The Detroit News, this is not the first rust-related recall for Ford. It estimates the company has repaired over two million vehicles since 2010 for problems on vehicles related to the iron oxide, including the rear wheel wells of the Freestar minivan.
The second recall covers 48,950 2013-2014 Ford Fusion, Escape, C-MAX and Lincoln MKZ models because welds in their seatbacks don't meet National Highway Traffic Safety Administration standards. The fault affects the front seats, and the sub-standard welds joining the setback to the recliner could increase the chance on injury. There have been no reported injuries or accidents caused by the problem, but there are 42,972 affected vehicles in the US and 4,744 in Canada.

Why the Detroit Three should merge their engine operations

GM and FCA should consider a smaller merger that could still save them billions of dollars, and maybe lure Ford into the deal. Fiat-Chrysler CEO Sergio Marchionne would love to see his company merge with General Motors. But GM's board of directors essentially told him to go pound sand. So now what? The boardroom battle started when Mr. Marchionne published a study called Confessions of a Capital Junkie. In it, Sergio detailed the amount of capital the auto industry wastes every year with duplicate investments. And he documented how other industries provide superior returns. He's right, of course. Other industries earn much better returns on their invested capital. And there's a danger that one day the investors will turn their backs on the auto industry and look to other business sectors where they can make more money. But even with powerful arguments Marchionne couldn't convince GM to take over FCA. And while that fight may now be over, GM and FCA should consider a smaller merger that could still save them billions of dollars, and maybe lure Ford into the deal. No doubt this suggestion will send purists into convulsions, but so be it. The Detroit Three should seriously consider merging their powertrain operations, even though that's a sacrilege in an industry that still considers the engine the "heart" of the car. These automakers have built up considerable brand equity in some of their engines. But the vast majority of American car buyers could not tell you what kind of engine they have under the hood. More importantly, most car buyers really don't care what kind of engine or transmission they have as long as it's reliable, durable, and efficient. Combining that production would give the Detroit Three the kind of scale that no one else could match. There are exceptions, of course. Hardcore enthusiasts care deeply about the powertrains in their cars. So do most diesel, plug-in, and hybrid owners. But all of them account for maybe 15 percent of the car-buying public. So that means about 85 percent of car buyers don't care where their engine and transmission came from, just as they don't know or care who supplied the steel, who made the headlamps, or who delivered the seats on a just-in-time basis. It's immaterial to them. And that presents the automakers with an opportunity to achieve a staggering level of manufacturing scale. In the NAFTA market alone, GM, Ford, and FCA will build nearly nine million engines and nine million transmissions this year.