1964 Ford F-100 on 2040-cars

Auto blog

Man has surgery to remove T-Bird turn signal that's been in his arm for 51 years

In 1963, real estate agent Arthur Lampitt was driving a new Ford Thunderbird near East Peoria, Illinois on his way to an appointment when he collided head-on with a truck. A massive accident that was so bad that it was originally reported as a fatal crash, Lampitt suffered a broken hip and that became the focus of doctors' efforts. In fact, no one noticed the fact that the turn-signal stalk had been broken off the steering column and had lodged itself in Lampitt's arm. Fast-forward to around ten years ago, when Lampitt set off a courthouse metal detector because of a "slender object, about the size of a pencil" in his arm. Despite that unnerving discovery, the doctor who examined Lampitt said that since it didn't hurt, he needn't worry about it. This year, however, it did start hurting and the affected arm started to bulge. Lampitt decided to have the issue seen to, and suspected it might have something to do with his 1963 accident. When he looked through photos of the wreck taken by a friend, he noticed the turn-signal stalk of the Thunderbird missing and figured that was the culprit. After a 45-minute outpatient surgery, the surgeon verified it: a slim, slightly bent and corroded, seven-inch metal cylinder with a trumpeted end. The surgeon said a protective pocket had formed around it, which is why it could remain in Lampitt's arm so long, but it was still unusual - "We see all kinds of foreign objects like nails or pellets, but usually not this large." Lampitt, who is expected to make a full recovery, says he might make a keychain out of it, once he's done just holding it. News Source: St. Louis Post-DispatchImage Credit: Jesse Bogan, St. Louis Post-DispatchTip: Jon Auto News Ford Coupe accident wreck ford thunderbird turn signal

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video:

Recharge Wrap-up: Ford's "snowtonomous" Fusion Hybrid, Porsche eyes battery makers

Bosch and Panasonic are vying to be the battery supplier for Porsche's electric sports car based on the Mission E concept. While Bosch's costs may be higher, its solution would offer simpler logistics. Panasonic is already well established as a battery maker, providing the packs for the Porsche car's rival, Tesla. "We're in the final stage of making a decision," says Porsche CEO Oliver Blume, declining to comment on specific manufacturers. Neither Bosch nor Panasonic provided comment. Read more from Automotive News. Renault will supply a fleet of 150 Renault Zoe EVs for a smart solar charging project in Utrecht, Netherlands. The project involves the installation of 1,000 EV chargers powered by 10,000 photovoltaic panels. The Renault Zoes would be used as part of a carsharing program powered by the solar chargers. Renault and its partners will also implement a vehicle-to-grid system to provide energy during peak demand from the solar chargers and connected EVs. Read more in the press release from Renault. Ford has been testing an autonomous Fusion Hybrid prototype that is capable of driving itself in snowy conditions. Ford uses 3D mapping to scan the drive route. Its LiDAR laser mapping can even detect single falling snowflakes. It collects and processes up to 600 gigabytes of data per hour, comparing its environment to saved maps, a process that helps establish location more precisely than GPS. In addition to the LiDAR systems, the car is also equipped with cameras and radar to help it navigate. Eventually, the car could even be able to clean off its sensors when it detects loss of performance from ice and dirt. Read more in the press release below. FROM AUTONOMY TO SNOWTONOMY: HOW FORD FUSION HYBRID AUTONOMOUS RESEARCH VEHICLE CAN NAVIGATE IN WINTER DEARBORN, Mich., March 10, 2016 – Driving in snow can be a slippery challenge, with the potential for one blizzardy gust to white-out your field of view – a situation faced by the majority of people in the United States. So if self-driving cars are to become a reality – and they almost certainly will – they must be able to navigate snow-covered roads. In its quest to bring self-driving vehicles to millions of people around the world, Ford reveals six facts about its technology that allows for a car to drive itself in snow. 1. Mapping the way: Ford first creates high-resolution 3D maps using LiDAR technology to scan the area its autonomous vehicle will later drive in the snow.