2005 Ford Explorer on 2040-cars

Auto blog

Ford Explorer, Jeep Grand Cherokee flunk IIHS passenger-side crash test

The Insurance Institute for Highway Safety (IIHS) has uncovered major safety-related problems while crash testing a number of popular midsize SUVs. Among those that scored an overall rating of "poor," the lowest possible score, are the Ford Explorer and Jeep Grand Cherokee. Both SUVs showed a high risk of injury to a front passenger during the IIHS' passenger-side small overlap front crash test. This test simulates what might happen if a car or SUV strikes an immovable object, like a telephone pole, at 40 mph and with roughly 25-percent of its front width. "Although some vehicles in this group offer very good protection, in other models, the airbags, safety belts and structure showed serious deficiencies," says IIHS chief research officer, David Zuby. "In those SUVs, a front-seat passenger would be at risk of injuries to the head, hip or leg in a right-side small overlap front crash." In the 2018 Ford Explorer, the front of the SUV showed the structure was "seriously compromised" during both driver- and passenger-side small overlap crash testing, according to the IIHS. The lower and upper door hinge pillar showed intrusion levels of 15 and 13 inches, while the door sill itself was pushed inward 6 inches toward the crash test dummy. The IIHS states these results indicate a high probability that a front occupant would suffer injuries to their right hip and lower left leg. The 2018 Jeep Grand Cherokee didn't fare much better. Not only did the Jeep exhibit 10 inches of intrusion at the lower door hinge pillar, the front passenger crash test dummy's head hit the dashboard through the front airbag. Worse still, the side curtain airbag didn't deploy and the front passenger door opened. The IIHS says there is a strong chance this would result in right leg injuries, along with the possibility of a serious head injury. Even vehicles that earned an "acceptable" in the small overlap front crash test showed definite room for improvement. The 2018 Honda Pilot, for example, showed good structural performance during the crash itself. But the front passenger crash test dummy's head slid off the deployed airbag and hit the dashboard hard, indicating a head injury might result in a similar real-world crash scenario. Two other SUVs that scored "acceptable" ratings included the 2018 Nissan Pathfinder and 2018 Toyota Highlander. Scoring top marks of "good," the highest rating, in these IIHS crash tests were the 2018 Volkswagen Atlas, 2018 GMC Acadia, and 2019 Kia Sorento.

Junkyard Gem: 1971 Mercury Comet 2-Door Sedan

When Ford introduced the original Maverick for the 1970 model year, Dearborn tradition required that a Mercury-badged version be created. That car ended up being the Comet, built from the 1971 through 1977 model years. Here's one of those first-year Comets in rough but recognizable condition, found in a Denver self-service yard not long ago. The Comet name had spent the 1960s affixed to the flanks of Mercurized Ford Falcons (1960-1965) and Fairlanes (1966-1969). Since the Maverick was the successor of the Falcon — sales of which went into an irrecoverable downward spiral once its sportier Mustang first cousin hit the streets — it made sense to move the Comet name over to the Mercury version. Nearly every American Mercury model ever sold was a U.S.-market Ford model with a different name and some gingerbread slapped on. Notable exceptions to this tradition include the 1999-2002 Mercury Cougar (mechanically based on the Contour but with a unique body) and the 1991-1994 Mercury Capri (an Australian-built mashup of Mazda components borrowed from the Ford Laser). The Comet was by far the cheapest Mercury model available in 1971, though it was considered more prestigious than its Maverick counterpart. The price tag on the '71 Comet two-door sedan started at $2,217 (about $16,505 in 2022 dollars), while the '71 Maverick two-door sedan cost $2,175 ($16,193 today). Meanwhile, AMC would sell you a new Hornet two-door sedan for one dollar less than a Maverick, Chevrolet had the Nova coupe for a dollar more than the Maverick, and Plymouth offered the Valiant Duster for $2,313 ($17,220 now). Toyota had a Maverick competitor as well that year, with the Corona at $2,150 for the sedan and $2,310 for the coupe. Having driven every one of the aforementioned models, I'd take the Duster if I went back in time and had to choose one (as a 1969 Corona owner, I'm not a fan of the 1971 facelift, though the Corona's build quality beats the Duster's). The build sticker on this car tells us that it was built at the Kansas City Assembly Plant (where Transits and F-150s are made today) and sold through the Los Angeles district sales office (there was a DSO in Denver, so it's a near-certainty that this car didn't start out in Colorado). The paint started out as Bright Blue Metallic (it's neither bright nor metallic 51 years down the road) and the interior was done up in Medium Blue Cloth & Vinyl.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.