2011 Ford Explorer Xlt on 2040-cars

Auto blog

Who sold the most heavy-duty pickups in 2012? PickupTrucks.com investigates

Domestic manufacturers enjoyed a good year for heavy-duty pickup sales in 2012. PickupTrucks.com has taken a close look at exactly how those sales broke down between each manufacturer and between three-quarter and one-ton pickups. Ford sold some 67,786 F-250 Super Duty models last year with the Chevrolet Silverado 2500 HD falling just behind at 56,359 units. The Ram 2500 HD came in third at 41,918, while the GMC Sierra 2500 HD earned itself fourth place with 27,616 deliveries. While Ford held onto the top spot in the one-ton market, Ram easily nailed down second place by selling more 3500 HD models last year than General Motors sold Silverado 3500 HD and Sierra 3500 HD trucks combined.
So, did GM manage to sell more trucks than Ford with its two brands? Very nearly. Ford sold a total of 119,338 heavy-duty pickups to GM's 111,555. Ram, meanwhile, moved a distant 77,583. But perhaps more interesting is the diesel take rate in this segment. PickupTrucks.com says 80 percent of all domestic one-ton trucks roll from the dealer lot with a turbo-diesel under the hood. Head over to the site for a closer look at the breakdown.

UK's Loughborough University improving Ford's 1.0-litre EcoBoost engine

How much does it cost for college students to study zero emissions vehicles? At Loughborough University in the UK, a new Advanced Propulsion Centre (APC) is being built at a cost of a billion pounds ($1.7 billion US). The school has just announce that it will fund a number of grad student positions and is creating a new Chair in Advanced Propulsion Systems, which sounds like a fun job to us. We're weird like that. There will be a total of four professor-type positions in the new Center, including the chair, all focused on teaching students about low-carbon vehicle technologies, specifically electric and hybrid ones. The school is investing 1.5 million pounds ($2.5 million) for the new positions. There is a bigger picture as well, a 26-million pound ($44 million) Advanced Combustion Turbocharged Integrated Variable-valvetrain Engine (ACTIVE) project, which uses funds not only from the school but also from Ford and others. The point of ACTIVE is to study Ford's 1.0-liter EcoBoost engine and "improve further its efficiency and ensure it exceeds 2020 emission regulations." This is already a popular engine for the automaker, and it will need to stay at the bleeding edge of efficiency to remain as important in 2020 as it is today. Loughborough University has been working with automakers on advanced energy technologies for years, for example with Rolls-Royce and fuel cells in 2007 and the Lotus Hotfire engine in 2008. University invests GBP1.5M in advanced propulsion research to advance zero emissions vehicles challenge Loughborough University is investing GBP1.5M over five years in strategic research appointments, inspired by the global challenge to develop the new advanced propulsion technologies required for the move to zero emission vehicles. These appointments reinforce the University's world-class research in low-carbon vehicle technologies, adding new dimensions concerned with electric and hybrid drives. Four appointments will be made, including a Chair in Advanced Propulsion Systems, supported by a number of PhD studentships. The GBP1.5M investment is part of the University's commitment to the recently announced Advanced Propulsion Centre (APC) to support the development of new supply chains for low carbon vehicles. APC is an initiative established by the Automotive Council that will see GBP1 billion of investment from government and industry over the next 10 years.

2015 Ford F-150 begins rolling off line at second factory

Ford needs more F-150s. Yeah, we just told you that a few days ago. The Blue Oval is reporting that its trucks are spending a mere 18 days on dealer lots, following a January that was the truck's best month in over a decade. Considering both of those facts, the timing is perfect for Ford to ramp up production of its all-aluminum truck by bringing its Kansas City, MO factory online. KC Assembly has been building F-150s for decades, and completed a $1.1-billion expansion to accommodate the all-aluminum 2015 truck (as well as for work on the Transit van). Similar to what was done at Ford's Dearborn, MI factory, the Blue Oval spent 13 weeks upgrading the plant's body shop, paint shop and a road-test course. Over 900 jobs were added as part of the update. Combined with the equally upgraded plant in metro Detroit, Ford can build 700,000 trucks per year. "The all-new F-150 has surpassed our expectations – setting new standards for fullsize truck capability, technology and efficiency," Joe Hinrichs, Ford's Americas president said in a statement. "With production starting at Kansas City Assembly, we are better poised to start meeting growing customer demand for our pickup." Scroll down for the official press blast from the Blue Oval. Related Video: KANSAS CITY ASSEMBLY PLANT COMES ON LINE AS SECOND U.S. FACTORY BUILDING ALL-NEW FORD F-150 2015 Ford F-150 starts production at Kansas City Assembly Plant; along with three shifts in operation at Dearborn Truck Plant, Ford is now producing even more units of the toughest, smartest, most capable F-150 ever All-new F-150 is turning more than four times faster than the overall full-size pickup truck segment; In addition to producing all F-150 models and cab configurations, Kansas City exclusively builds specialty F-150s with 8-foot cargo boxes and heavy payload packages to meet the needs of commercial fleet customers Kansas City Assembly Plant facilities transformed with the latest in manufacturing technology to build the first mass-produced truck in its class featuring a high-strength, military-grade, aluminum-alloy body and bed CLAYCOMO, Mo., March 13, 2015 – Ford today marks the official start of production of the all-new 2015 F-150 at Kansas City Assembly Plant, which joins Dearborn Truck Plant in building the toughest, smartest, most capable F-150 ever. This means Ford has expanded production of the first mass-produced light-duty pickup truck with a high-strength, military-grade, aluminum-alloy body.