2010 Xlt Used 4l V6 12v Automatic Rwd Suv on 2040-cars

Auto blog

Ford F-150, Chevy Silverado, Toyota Tundra flunk IIHS headlight test

The Insurance Institute for Highway Safety put pickup truck headlights to the test and found that the majority of them were equipped with subpar units. The 2017 Honda Ridgeline was the only truck to earn a rating of "good." The large pickup truck test was comprised of the: 2016 to 2017 GMC Sierra, 2017 Nissan Titan, 2016 Ram 1500, 2016 to 2017 Chevrolet Silverado, 2016 to 2017 Ford F-150, and 2016 to 2017 Toyota Tundra. The Sierra's headlights earned a rating of "acceptable," the headlights found on the Titan and Ram 1500 were found to be "marginal," and the ones on the Silverado, F-150, and Tundra were rated as "poor." IIHS claims the F-150 was the most disappointing out of the large pickup trucks as both its halogen and optional LED headlights failed to provide adequate visibility during testing. The Ridgeline (which earned a "good rating"), is usually considered a midsize or small truck, though IIHS included it in the field of large pickups. The headlights on the 2016 Chevrolet Colorado, 2016 GMC Canyon, 2016 Nissan Frontier, and 2016 to 2017 Toyota Tacoma, which made up the small pickup truck group, all earned a rating of "poor." The IIHS claimed the Colorado had the worst headlights of any truck that was tested, as the base vehicle's units were only able to illuminate up to 123 feet in front of the car. The Ridgeline's headlights, for reference, were able to illuminate up to 358 feet in front of the vehicle. To conduct its test, the IIHS utilizes a special tool to measure how far light is projected out of the headlights in different driving situations. The trucks' headlights were tested in a straight line and in corners, while vehicles with high-beam assist were given extra praise. The headlights on the pickup trucks also mimic the testing that was done on small SUVs and cars earlier this year. Next year, automakers will need to fit their vehicles with headlights that earn a rating of either good or acceptable to earn the IIHS Top Safety Pick+. Related Video:

Ford highlights new F-650 and F-750 with full-size Tonka show truck [w/videos]

Who among us hasn't been tempted by the prospect of buying a big yellow truck and painting the name Tonka along the side? Well apparently there were some folks over at Ford who were just as tempted, only they actually had the means to make that childhood fantasy a reality in the form of the truck you see here. Revealed at the NTEA Work Truck Show this week in Indianapolis, this Tonka show truck stands nearly 10 feet tall. It's painted bright yellow, just like the one you played with in the sand box (and probably still would given the opportunity and maybe no one else looking) and has a blacked-out nose treatment and special graphics. As you can see, it's also equipped with a working dump bed, and has a truly staggering 33,000-pound gross vehicle weight rating, built to showcase the Blue Oval's new line of medium duty trucks. Of course "medium duty" is a relative term, and the new F-750 is clearly a heavier piece of machinery than the company's own Super Duty pickups, but they're lighter-duty than a proper big rig. The new 2016 Ford F-650 and F-750 are just as tough as the models they replace, but they're now quieter and more comfortable to use. In fact, Ford says its 6.7-liter Power Stroke V8 diesel is now 25-percent quieter inside the cabin at highway speeds, 45-percent quieter at idle and 35-percent quieter standing outside in front of the grille. Ford notes that it's the only medium-duty truck manufacturer that makes its own engines and transmissions. That Power Stroke diesel comes with 270 horsepower and 675 pound-feet of torque as standard, but can be upgraded to 300 hp and 700 lb-ft or all the way up to 330 hp and 725 lb-ft. Commercial buyers will also be able to choose between Regular, Super and Crew Cab models with a straight-frame, dock-height or tractor-towing frames, meaning that whatever it is you've got to haul, chances are high that the new Ford F-650 and F-750 can be set up to get the job done.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.