2008 Ford Explorer Sport Trac on 2040-cars

Auto blog

Ford preparing camera-based Front Lighting System

Ford's European Research and Innovation Center in Aachen, Germany is in pre-development on two new lighting technologies that Ford expects to be available "in the near-term." The Camera-Based Advanced Front Lighting System uses GPS and a video camera in the rear-view mirror housing to move the adaptive headlights with the road terrain. When the car detects a roundabout or an intersection, for instance, the light beam widens to offer a bigger view of what's coming from the side. If GPS detected the intersection, the location is tagged so that the beam automatically widens when it is encountered again. The Spot Lighting system uses an infrared camera behind the grille, and is similar to but less complex than systems employed by Mercedes-Benz and Audi. When the infrared camera detects a potential hazard like a person or an animal in or near the road up to 390 feet ahead, it can shine one of two LED spotlights on the danger. A display in the dash cluster will highlight the object with a yellow or a red box, depending on the how close it is and how dangerous it might be. Even though there are only two spotlights, mounted next to the fog lights on the lower front bumper, the system can detect up to eight objects at a time. Don't expect to see these features come to the US, though. Our regulations remain opposed to such headlight trickery, so until that changes, Ford says it's focusing these developments on the European and Asian markets. The video above shows how it works, the press release below has more details. FORD DEVELOPING ADVANCED HEADLIGHTS THAT POINT OUT PEOPLE, ANIMALS IN THE DARK, AND WIDEN BEAMS AT TRICKY JUNCTIONS - Ford is developing advanced lighting technology that enables drivers to more easily see potential hazards when driving at night - Camera-Based Advanced Front Lighting System widens beam at junctions and roundabouts after interpreting traffic signs - GPS-enabled system uses forward-facing camera to remember roadways and direct lighting to help drivers better see bends in the road – effectively lighting the way home on previously travelled routes - Spot Lighting uses infra-red camera to detect pedestrians, cyclists, and animals, and highlight the potential hazards; system can detect up to eight potential hazards and highlight two highest priorities using specially designed headlights and on-screen display AACHEN, Germany, July 17, 2015 – Driving at night, particularly on unlit roads, can be a nerve-wracking experience.

Rising aluminum costs cut into Ford's profit

When Ford reports fourth-quarter results on Wednesday afternoon, it is expected to fret that rising metals costs have cut into profits, even as rivals say they have the problem under control. Aluminum prices have risen 20 percent in the last year and nearly 11 percent since Dec. 11. Steel prices have risen just over 9 percent in the last year. Ford uses more aluminum in its vehicles than its rivals. Aluminum is lighter but far more expensive than steel, closing at $2,229 per tonne on Tuesday. U.S. steel futures closed at $677 per ton (0.91 metric tonnes). Republican U.S. President Donald Trump's administration is weighing whether to impose tariffs on imported steel and aluminum, which could push prices even higher. Ford gave a disappointing earnings estimate for 2017 and 2018 last week, saying the higher costs for steel, aluminum and other metals, as well as currency volatility, could cost the company $1.6 billion in 2018. Ford shares took a dive after the announcement. Ford Chief Financial Officer Bob Shanks told analysts at a conference in Detroit last week that while the company benefited from low commodity prices in 2016, rising steel prices were now the main cause of higher costs, followed by aluminum. Shanks said the automaker at times relies on foreign currencies as a "natural hedge" for some commodities but those are now going in the opposite direction, so they are not working. A Ford spokesman added that the automaker also uses a mix of contracts, hedges and indexed buying. Industry analysts point to the spike in aluminum versus steel prices as a plausible reason for Ford's problems, especially since it uses far more of the expensive metal than other major automakers. "When you look at Ford in the context of the other automakers, aluminum drives a lot of their volume and I think that is the cause" of their rising costs, said Jeff Schuster, senior vice president of forecasting at auto consultancy LMC Automotive. Other major automakers say rising commodity costs are not much of a problem. At last week's Detroit auto show, Fiat Chrysler Automobiles NV's Chief Executive Officer Sergio Marchionne reiterated its earnings guidance for 2018 and held forth on a number of topics, but did not mention metals prices. General Motors Co gave a well-received profit outlook last week and did not mention the subject. "We view changes in raw material costs as something that is manageable," a GM spokesman said in an email.

Ford shutters Genk assembly plant in Belgium

Ford has become the latest automaker to close one of its European assembly plants. The facility in question is located in the Belgian city of Genk and has been in operation since the early '60s when it started building the Taunus, Ford's first mass-produced, front-drive model. As part of the plan first announced over two years ago, the Genk Body & Assembly Plant is now closing its doors after half a century in the business and over fourteen million vehicles built. Although the plant itself employed some 5,000 workers, once you take into account the suppliers built up around the plant, the overall impact on employment in the area edges closer to 12,000. Genk Body & Assembly had until recently been tasked with producing the Mondeo sedan (which in its current iteration we know as the Fusion) as well as the S-Max and Galaxy minivans. Production of the Mondeo shifted in 2013 to the company's plant in Valencia, Spain, which also handles the Kuga crossover and Transit Connect cargo van, and will soon take over the minivans from Genk as well. The move follows a similar decision undertaken by General Motors to close the Opelwerk plant in Bochum, Germany. It also reflects a scaling down of automobile production in Belgium specifically: although Audi still manufacturers in Brussels and and Volvo in Ghent, Opel closed its plant in Antwerp in 2000 and Renault ceased production in Vilvoorde back in '97. However Ford still maintains its famous proving ground half an hour to the north in Lommel, Belgium. News Source: AutovisieImage Credit: Kristof Van Accom / AFP / Getty Plants/Manufacturing Ford plant ford s-max ford galaxy