6.8l V-10 4wd Limited Slip 4.30 Rear Axle Rear Audio Controls Well Care For on 2040-cars

Auto blog

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video:

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.

All the details on Plug In 2014 electric vehicle conference you could ever want

One of the best parts of the Plug In 2014 Conference in San Jose, CA last week was getting to listen in on thoughts about the state of the plug-in vehicle industry from people who have been involved with it for ages. They bristle when you call them the "Old Guard" (learned that one the hard way), but these are the people who have been through a number of ups and downs with plug-in vehicles, so they've got what we call perspective. Their knowledge was on full display in the three plenary sessions, which the Plug In Conference organizers have given us permission to share with you. Each is at least 90 minutes long, so make sure to set some time aside to enjoy the discussions after you download them (any help with making them streamable would be appreciated). Follow us below to see what we've got to offer. Opening Plenary (audio link). "The Road Ahead – Delivering on a Vision for Sustainable Transportation." Moderated by Mark Duvall (director of energy utilization at EPRI, the Electric Power Research Institute, and a long-time EV advocate), this panel featured: Jack Broadbent, Executive Officer / APCO, Bay Area Air Quality Management District Pat Romano, President & Chief Executive Officer, ChargePoint, Inc. Aaron Johnson, Senior Director, Customer Programs, Pacific Gas and Electric Company Brendan Jones, Director, EV Sales Operations & Infrastructure Deployment, Nissan North America, Inc. David W. Cash, Commissioner, MassDEP Dan Sperling, Director, Institute of Transportation Studies, University of California, Davis Highlights: Educating drivers to "get over the gas station" is a key strategy, how Level 2 and DC Fast Charging are really "a new paradigm," that there have been well over 214,000 EVs sold in US as of July 2014 and where Nissan sees huge potential for more EV sales (Northeast US and medium-size cities like St. Louis and Pittsburgh). Wednesday Morning Plenary (audio link). "Getting to the Mass Market – A Discussion of Ideas for Widespread PEV Adoption." Moderated by John Gartner, research director for smart transportation at Navigant Research.