2004 Ford Excursion Limited Sport Utility 4-door 6.0l on 2040-cars

Auto blog

Ford Expedition, Lincoln Navigator recalled for fire risk

Owners of some 2021 Ford Expedition and Lincoln Navigator SUVs are being urged to park their vehicles outdoors and away from structures until they can be taken to dealers for repairs. Ford issued a recall covering 39,000 vehicles due to engine fires under their hoods, and it's not certain at this point what's causing the flames to start. According to documents posted on the National Highway Safety Administration's website, "The remedy is still under development." Ford says it has reports of 16 under-hood fires, with 14 of those happening in vehicles owned by car rental companies. The fires can happen even while the engine isn't running. According to Ford, "Some customers have reported a burning smell and smoke from the front passenger engine compartment while driving." The fires seem to be starting "in the rear of the engine compartment near the passenger side of the vehicle." Despite the under-hood fire risk, Ford is not at this time recommending that owners stop driving the vehicles. "We are working around the clock to determine the root cause of this issue and subsequent remedy so that customers can continue to enjoy using their vehicles," Jeffrey Marentic, general manager of Ford passenger vehicles, said in a statement. Ford says the fires appear to be limited to SUVs built from Dec. 1, 2020 to April 30, 2021 and says it has no fire reports from vehicles built before or after those dates. In a separate recall, Ford is also calling in about 310,000 heavy-duty trucks because the driver's air bag may not inflate in a crash. That recall covers certain 2016 F-250, F-350, F-450 and F-550 trucks. According to documents posted by NHTSA, dust can get into the airbag wiring in the steering wheel, which can cut electricity to necessary components. To fix the problem, dealers will replace the steering wheel's wiring. And in a third recall, Ford announced it is bringing in 464 Mustang Mach-E electric SUVs from 2021. A software problem in the electric vehicle can cause unintended acceleration, deceleration or a loss of drive power in all-wheel-drive vehicles. NHTSA documents say that the powertrain control computer may not detect a software error. The problem will be fixed by dealers or by an online software update.

Check out Ford's fully automated self-parking car [w/video]

As automakers continue to find uses for autonomous and semi-autonomous vehicle technology, Ford of Europe has announced that it is developing a self-parking system for future use. More advanced than the Active Park Assist already offered in many Ford products, the new Fully Assisted Parking Aid can take full control of the vehicle and can navigate angled and perpendicular parking spots.
While today's Active Park Assist can only parallel park with the driver controlling the gas, brake and gear selection, Fully Assisted Parking Aid can operate steering, gas, brake and gear selection all while making sure the car is properly parked in the intended space. As with APA, the driver pushes a button to make the car look for a proper spot (at speeds of up to 18 miles per hour), and when an adequate space is located, the operator pushes another button (either inside the car or outside via remote control) for the car to park itself - the button must be pressed throughout the whole parking maneuver. Even though Ford says that the car can effect gear selections on its own, the system must still start from Neutral, and the automaker isn't saying whether the car can put itself into Park when done or put itself in Drive when the operator is ready to go.
Ford is also taking the opportunity to announce its new Obstacle Avoidance technology. This automated system is able to detect objects - including pedestrians - in the road, warn drivers of said objects and, if needed, stop and steer automatically to avoid hitting the obstacle. Both systems are still in the prototype phase, so there is no word as to when we could see either on a production vehicle.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).