Green 4x4 Hybrid Xlt 115k Hwy Miles Westcoast Suv Alloy Well Maintained on 2040-cars

Auto blog

Automakers donating money, vehicles and supplies to Oklahoma tornado relief effort

Judging by the destruction the Oklahoma City area experienced earlier this week, residents are going to need a lot of help in coming months. Fortunately, a number of automakers - including General Motors, Ford, Chrysler, Volkswagen, Honda and Toyota - have stepped up to donate money, supplies and vehicles to aid in the recovery and rebuilding processes.
Here's a quick rundown of which automakers have pitched in and what each contributed so far:
Ford Motor Company has donating $250,000 and a Transit Connect to the American Red Cross, and it will match all other donations made to the Red Cross (up to $250,000) using a special URL tied to the latter's website (link here). Additionally, its local Oklahoma dealers have thrown in an extra $150,000 for the United Way and the automaker will be offering an extra $500 toward the purchase of a new Ford vehicle.

Ford recalling 12,300 2015 F-150 pickups

Ford is recalling 12,300 of its new 2015 F-150 pickup trucks in North America. According to the automaker, an upper l-shaft may have been riveted improperly on these trucks, which can cause it to separate. If that happens, drivers may lose steering control without warning. Yikes. The affected trucks were built at Ford's Kansas City Assembly Plant between March 21 and 25, as well as the Dearborn Truck Plant between March 21 and 30. There are 12,328 total trucks included in this recall – 8,963 in the United States, 3,348 in Canada, and 17 in Mexico. Only 5,606 of the trucks are in customers' hands, the rest have yet to be sold. Ford is not aware of any accidents or injuries related to this problem, but knows of one incident where steering control was lost, and believes it to be related to this issue. Scroll down for Ford's official statement. Related Video: FORD ISSUES SAFETY RECALL FOR CERTAIN 2015 FORD F-150 VEHICLES IN NORTH AMERICA FOR UPPER I-SHAFT RIVET ISSUE Ford Motor Company is issuing a safety recall for approximately 12,300 2015-model Ford F-150 vehicles in North America for an upper I-shaft that might have been riveted improperly, potentially causing it to separate. If that happens, it could result in the loss of steering control without warning, increasing the risk of a crash. Ford is not aware of any accidents or injuries, but is aware of one report of loss of steering believed to be related to this condition. Affected vehicles include certain 2015 F-150 vehicles built at Kansas City Assembly Plant from March 19, 2015 to March 21, 2015 and certain 2015 F-150 vehicles built at Dearborn Truck Plant from March 21, 2015 to March 30, 2015. There are 12,328 vehicles that might be affected in North America, including 8,963 in the United States and federalized territories, 3,348 in Canada and 17 in Mexico. Of those, 6,722 vehicles are unsold, meaning 5,606 vehicles are in customer's hands. Dealers will inspect the upper I-shaft assembly and replace it if necessary at no cost to the customer.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.