2014 Ford Escape Titanium on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost

Earlier this week, Ford invited us to Charlotte, NC, to ride in an all-new 2015 Mustang fitted with its turbocharged 2.3-liter EcoBoost four-cylinder. It's the first forced-induction, four-cylinder ponycar for the Blue Oval since the sun set on the 1986 Mustang SVO. We jumped at the opportunity, as only a handful of people have ever been in the passenger seat of this new car, and most automotive media won't get as close as we did until this fall.
As we revealed in our Deep Dive, Ford will slot this new turbocharged four as premium powerplant between its naturally aspirated 3.7-liter V6 and the naturally aspirated 5.0-liter V8. At last mention, the automaker said the direct-injected, all-aluminum engine will develop 305 horsepower and 300 pound-feet of torque, returning the best fuel economy of the three powerplants in the process. History buffs will note that those figures are appreciably stouter than the 200 horses and 240 lb-ft that the '86 SVO realized out of the same displacement, and the latter's figures were hugely impressive at the time. On paper, the new EcoBoost four looks to be a good fit for most owners who want to balance performance with efficiency - we were eager to see how it felt from the passenger seat.
Riding Notes

Diesel details: Comparing Ram 1500 EcoDiesel, Chevy Silverado Duramax, Ford F-150 Powerstroke

With specifications for the 2019 Ford F-150 Power Stroke diesel already out, and the details on the 2020 Ram 1500 EcoDiesel and Chevy Silverado Duramax (and its GMC Sierra twin) trickling out, we felt it was a good time to start comparing the full-size trucks' light-duty diesels. Bear in mind, we've only driven one of these new diesel trucks, so we'll be sticking to numbers for now. Some numbers haven't been announced yet, either, but stay tuned, because we'll be updating this post with additional specifications as they become available. And if you want to compare any other versions of these trucks with other vehicles, be sure to check out our comparison tool. Now let's start comparing, starting with our big chart of numbers below. As we can plainly see, these trucks are quite closely matched. Each one has six cylinders, a displacement of 3.0 liters and a turbocharger to boost it. The output of each is somewhat close, too. The Ram 1500 EcoDiesel is the torque king at 480 pound-feet, 20 more than the GM trucks and 40 more than the Ford. The GM trucks win on power, though, with 277 ponies, 17 more than the Ram, and 27 more than the Ford. GM does report that you get their trucks' peak 460 pound-feet of torque from 1,500 rpm to 3,000 rpm, whereas the others only report peak torque at a particular point in the rev band, but all of these trucks should have wide, flat torque curves as you would expect from modern turbodiesels. 2020 Ram 1500 EcoDiesel View 8 Photos Engine output is only one part of the truck performance equation. We also have towing and payload capacity, as well as fuel economy. With towing, the Ram 1500 is the current leader with a maximum capacity of 12,560 pounds. That tops the Ford F-150's 11,400-pound tow rating by well over 1,000 pounds. The F-150 can carry 2,020 pounds in its bed, but we don't know yet whether that's better or worse than the Ram or the GM trucks. We also don't have numbers for the GM trucks' towing capacities. View 9 Photos As for fuel economy, the Ford F-150 manages a thoroughly impressive 22 mpg in the city and 30 on the highway with two-wheel drive. Choosing four-wheel drive drops those numbers to 20 and 25 respectively. The fuel economy numbers for the Ram, Chevy and GMC haven't been revealed yet, but for some comparison, we can look at the old Ram EcoDiesel. That truck's best fuel economy was 20 in the city and 27 on the highway with two-wheel drive.

2015 Hennessey Ford Mustang hits 207.9 mph

After hitting over 195 miles per hour a few months ago, John Hennessey was barely out of his personal HPE700 Mustang before he said that 200 mph was achievable. Don't doubt a man who knows a ton about taking cars to insane speeds. With the new HPE750 Mustang, he and his customers can finally surpass the 200-mph mark in their cars. "If at first you don't succeed, just add more horsepower and rpm and try again," Hennessey said in the company's announcement. Rather than the 717 horsepower and 632 pound-feet of torque from the supercharged 5.0-liter V8 in the HPE700, the HPE750 ratchets the same powertrain up to an even more potent 774 hp and 648 lb-ft. In a real show of confidence, the Hennessey team brought along Jay Leno when it returned to the Continental Tire Proving Grounds in Uvalde, TX, to set a new top speed with the HPE750. The upgrades to the Mustang definitely paid off because the pony car reached a GPS-verified 207.9 miles per hour down the straight. The run will eventually appear on a segment on the upcoming Jay Leno's Garage TV show that will air CNBC. Prices for the HPE750 start at $59,500 USD, including the base 2015 Mustang GT, but building an exact replica of this one would cost $69,374, according to Hennessey. In addition to the huge top speed, the company claims that the coupe can reach 60 mph in 3.4 seconds and cover the quarter mile in 10.9 seconds. 774 HP Hennessey Mustang Tested to 207.9 mph Jay Leno visits Texas tuner for upcoming TV series on CNBC June 2, 2015 Uvalde, Texas—On Wednesday, May 27, 2015, professional driver, Brian Smith, drove the Hennessey HPE750 Supercharged Mustang to a top speed of 207.9 mph. In the process, Hennessey's potent pony car became the first 2015 Mustang to break the 200 mph mark. Jay Leno was on hand to witness the record speed while filming an upcoming episode of Jay Leno's Garage, which will air on CNBC later this year. The run was made on the 8.5 mile high speed oval at the Continental Tire Proving Grounds located in Uvalde, Texas – the same test track where John Hennessey test drove the company's HPE700 Mustang to a top speed of 195 mph back in February of this year. During both tests, speeds were validated with Racelogic's VBox 3i GPS data logging system. "If at first you don't succeed, just add more horsepower and rpm and try again," said company founder and president, John Hennessey.