2014 Ford Escape Se on 2040-cars

Auto blog

Ford wants smart cruise that's speed and grade sensitive

Ford is working to make adaptive cruise control even smarter and more economical for future vehicles. The automaker now has a patent (pdf link) on a system to use information on the grade of the road, traffic data, and a driver's preferences to eke out better fuel mileage over a journey. This solution would essentially put a little hypermiling right into a model's software. The Blue Oval's patent refers to this tech as "route navigation with optimal speed profile," and the system starts by splitting the way to the driver's ultimate destination into many smaller pieces. Each one is analyzed based on GPS data, and traffic info is also constantly updated. Based on the occupants' preferred travel time, all this info is combined to figure out the most efficient speed for each leg of the journey. All of these calculations are actually more than the car's computers can handle, so some of the math is offloaded to a cloud-based network. According to Ford, some of the benefits come when tackling hills while diving. Maintaining a single speed when going up and down steep grades isn't the most efficient method, but current technology can't easily make the necessary adjustments. This system uses the GPS data to adapt the vehicle's speed and leave the situation with better fuel economy. Ford is currently making major investments into autonomous driving technology and has some prestigious partners. While the patent documents don't specifically mention the optimal speed profiles for driverless vehicles, they seem like a natural fit. Over the course of an entire trip, the fuel economy gains would likely be even greater than over a few miles on a relatively flat interstate.

GM takes 2020 full-size pickup sales crown

It's no secret that 2020 was an unconventional year for auto sales. Extenuating circumstances or not, it was a year of upheaval even for ever-resilient (and ever-profitable) pickups, with General Motors taking the crown from Ford in the full-size segment.  The Ford F-Series still outsold every other full-size pickup nameplate in the country by a significant margin. It's only when you combine GM's Chevrolet Silverado and GMC Sierra variants that you get a number that exceeds Ford's. This isn't really a new phenomenon, either. In fact, it was only somewhat recently that Ford took the overall full-size crown away from GM, and not only did Ford widen the gap in recent years, but Ram has once again become a legitimate challenger, even managing to outsell the Silverado by a healthy margin in 2019, but never coming close to the F-Series in terms of total volume.  But, 2020 being 2020, things got weird yet again. Ram remains relevant, of course, but Ford got caught with its pants down thanks to the one-two punch of COVID and the generational changeover of the core F-150 model, which resulted in a production interruption as the company's assembly facilities transitioned from building the old 2020 model to the new-for-2021. This perfect storm, as it turns out, was sufficient for GM to walk away with the full-size crown. See for yourself: Full-size 2020 pickup sales: GM total: 847,110 F-Series: 787,422 Silverado: 594,094 Ram: 563,676 Sierra: 253,016 Tundra: 109,203 Titan: 26,439 As you can see, Ram slipped back behind Silverado, slotting comfortably into third place. The Silverado 1500 had a flat year, but the heavy- and medium-duty variants bucked the trend and contributed to a slight uptick in sales for the nameplate, while F-Series tumbled more than 12% (nearly 110,000 units), opening the door for GM to steam ahead.  There were similarly significant shakeups in the midsize truck segment. First, 2020 was the first full year of retail sales for the Gladiator pickup, which surged to fourth place behind the stalwart Tacoma, Ranger and Colorado. GM's combined sales of the Colorado and Canyon are good enough for second place by manufacturer, but nowhere close to what it would take to dethrone Toyota.

Ford recalls Explorer and Lincoln MKC for fire hazard

The Basics: Ford will recall 5,536 examples of the 2016 Explorer and 2015-2016 Lincoln MKC. The Explorers have build dates between October 20, 2014, and January 28, 2016, at the Chicago Assembly Plant. The MKCs are from between November 25, 2013, and January 25, 2016, at the Louisville Assembly Plant. In total, there are 3,129 total affected examples of the 2015-2016 Lincoln MKC and 2,407 examples of the 2016 Ford Explorer. Of these, 1,543 are in the US and 3,993 are in Canada. The Problem: The combination of the engine block design and the block heater in these vehicles can cause the part to overheat when plugged in. Injuries/Deaths: None reported, but there are two cases of underhood fires in Canada. If you own one: Ford will begin notifying owners during the week of May 16, company spokesperson John Cangany tells Autoblog. Related Video: Ford issues safety recall for certain 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to replace engine block heaters Ford is issuing a safety recall for approximately 5,500 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to remove the heaters and replace them with an updated design. The engine block design, coupled with the particular block heater installed in these vehicles, causes the unit to be susceptible to overheating when the vehicle is parked and the block heater is plugged in –increasing the risk of an underhood fire. Ford is aware of two reports of underhood fires in Canada, but is not aware of any accidents or injuries related to this issue. Affected vehicles include certain 2015-2016 Lincoln MKC vehicles built at Louisville Assembly Plant, Nov. 25, 2013 through Jan. 25, 2016 and certain 2016 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 20, 2014 through Jan. 28, 2016. There are 5,536 vehicles affected by the issue, including 3,129 2015-2016 Lincoln MKC and 2,407 2016 Ford Explorer vehicles, with 1,543 of the affected vehicles in the United States and federalized territories and 3,993 in Canada. Dealers will remove and replace the engine block heater with an updated design and, if needed, replace the cord at no cost to the customer.