2012 Ford Edge Limited Awd Panoramic Roof Hid Headlamps 4,734 Miles on 2040-cars

Auto blog

2014 Ford Transit Connect Taxi hopes to fare thee well

New York City may have selected its taxi of tomorrow, but there are still plenty of municipalities across the US with citizens that depend on yellow livery cars to get them across town in a jiffy. That's why Ford is going ahead with this, the new Transit Connect Taxi.
Based on the 2014 Transit Connect, the TC Taxi boasts a number of features designed to make the compact van appeal to discerning taxi drivers and their fares, with the most notable upgrade being a standardized prep package to convert the 2.5-liter four to run on liquefied petroleum or compressed natural gas. The clean-burning fuel options will allow operators to save on fuel costs and cut down on pollution without sacrificing performance.
A lower load floor and a new twist-beam rear suspension are meant to improve the riding experience for passengers, while the longer 2014 Transit Connect sports extra cargo space as well. In addition to the CNG/LPG conversion, the Transit Connect Taxi can also be easily modified for wheelchair access. Drivers, meanwhile, will have access to optional goodies like Sync with MyFord Touch and a rear-view camera.

Watch as U.S. auto industry springs back to life after lockdown

WARREN, Michigan — The Detroit Three automakers and their suppliers began restarting assembly lines on Monday after a two-month coronavirus lockdown in a slow revival of a sector that employs nearly 1 million people in the United States. On a chilly and damp Monday morning, hundreds of workers at Fiat Chrysler Automobile's (FCA) truck plant in Warren, Michigan, began lining up before 4 a.m. to start the 5 a.m. shift. Signs overhead read: "Let's restart." "I'm a little nervous," said Larry Smith, 53, of New Baltimore, who works on wheel alignment away from the assembly line. "They made all the precautions (and) they've done everything they can to prepare us ... I'm trusting in God." Detroit automakers on Monday said there were no issues with absenteeism as the plants opened. FCA reopened four U.S. assembly plants on Monday, including Warren Truck, on a single shift, as well as four parts plants. The reopening of car plants will be a closely watched test of whether workers across a range of U.S. industries can return to factories in large numbers without a resurgence of infections. General Motors Co, Ford Motor Co and FCA have all been preparing for weeks to reopen their North American factories in a push to restart work in an industry that accounts for about 6% of U.S. economic activity. Investors welcomed the gradual restart, sending GM's shares up more than 9% on Monday. FCA shares rose 7.3%, while Ford's were up 6.7%. Auto companies have redesigned assembly lines and retrained workers in an effort to avoid coronavirus outbreaks that could derail production again. Workers entering factories on Monday were checked by temperature monitors. Face masks or shields are standard protective equipment. Jobs such as installing seat belts that used to require two or more workers to get close together inside a vehicle have been redesigned to keep people a safe distance apart. Plastic screens have been installed along assembly lines to separate workers leaning in to the engine compartments of vehicles. Break areas have been reconfigured to keep workers six feet apart. The Detroit automakers have collaborated with each other and with the United Auto Workers to develop common coronavirus safety practices. Other automakers in the United States are adopting similar safety measures.

Chevy's latest Silverado videos assume we're idiots

UPDATE: This article has been revised to reflect that any mention of materials used in a future Chevrolet Silverado is speculation. Can we have a sound, rational debate about the merits of aluminum versus steel? According to Chevrolet's latest marketing videos pitting the Silverado against the Ford F-150, the answer is no. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of course, this will all be a hilarious joke when an aluminum-bodied Silverado comes in 2018. That's an if, as a member of the General Motor public relations team has reminded me that any articles regarding future product are pure speculation. Until then Chevy needs to sell the current Silverado, with its body comprised chiefly of steel, against the Ford F-150's lightweight aluminum panels. Instead of touting the merits of the "most-dependable, longest lasting pickup," the strategy seems to center around negative propaganda towards the 13th element. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of the three videos, the most fair is Silverado vs. F-150 Repair Costs and Time: Howie Long Head to Head. Basically: aluminum costs more than steel, it's more difficult to repair, and requires special equipment for body shops. In terms of Chevy versus Ford, the blue oval truck costs more and takes longer to repair - an average of $1,755 more and 34 more days in the shop, according to the ad. But why stop there when you can have pitchman Howie Long raising an eyebrow at random facts? When Silverado Chief Engineer Eric Stanczak says of the Ford, "It's manufactured in a way that combines aluminum, rivets, and adhesive in a process that's different than Silverado." Long responds, "Huh. Interesting." At the end of the video, Long says "I'd be interested to know what happens to insurance costs." Note he's not saying anything substantive. If Chevy's legal team could sign off on some facts about insurance rates, it would be in this ad. On our Autoblog Cost to Own calculator, there is no significant difference in projected insurance costs between the two trucks. But at least that ad has facts. The other two videos are pure hype. In Cages: High Stength Steel, real people are asked what they think of aluminum and steel in a room with two cages. Then a bear is released into the room, and the subjects scurry to the safety of the steel cage.