2014 Ford E-150 Commercial 4.6l V8 Minivan/van Repairable Rebuilder Easy Fix on 2040-cars

Auto blog

Ford F-150, Chevy Silverado, Toyota Tundra flunk IIHS headlight test

The Insurance Institute for Highway Safety put pickup truck headlights to the test and found that the majority of them were equipped with subpar units. The 2017 Honda Ridgeline was the only truck to earn a rating of "good." The large pickup truck test was comprised of the: 2016 to 2017 GMC Sierra, 2017 Nissan Titan, 2016 Ram 1500, 2016 to 2017 Chevrolet Silverado, 2016 to 2017 Ford F-150, and 2016 to 2017 Toyota Tundra. The Sierra's headlights earned a rating of "acceptable," the headlights found on the Titan and Ram 1500 were found to be "marginal," and the ones on the Silverado, F-150, and Tundra were rated as "poor." IIHS claims the F-150 was the most disappointing out of the large pickup trucks as both its halogen and optional LED headlights failed to provide adequate visibility during testing. The Ridgeline (which earned a "good rating"), is usually considered a midsize or small truck, though IIHS included it in the field of large pickups. The headlights on the 2016 Chevrolet Colorado, 2016 GMC Canyon, 2016 Nissan Frontier, and 2016 to 2017 Toyota Tacoma, which made up the small pickup truck group, all earned a rating of "poor." The IIHS claimed the Colorado had the worst headlights of any truck that was tested, as the base vehicle's units were only able to illuminate up to 123 feet in front of the car. The Ridgeline's headlights, for reference, were able to illuminate up to 358 feet in front of the vehicle. To conduct its test, the IIHS utilizes a special tool to measure how far light is projected out of the headlights in different driving situations. The trucks' headlights were tested in a straight line and in corners, while vehicles with high-beam assist were given extra praise. The headlights on the pickup trucks also mimic the testing that was done on small SUVs and cars earlier this year. Next year, automakers will need to fit their vehicles with headlights that earn a rating of either good or acceptable to earn the IIHS Top Safety Pick+. Related Video:

Lincoln Continental to end after one-and-done generation?

After only 18 months on sale, the vultures of rumor have begun circling above the Lincoln Continental. Ford Authority says "sources intricately familiar with Ford Motor Company's future product plans" for the domestic luxury brand say the Continental won't get another chance at life after this generation. Those sources didn't detail Ford's reasons for dispatching the executioner on another sad task, but if this is true, even the reasons we can only guess make enough sense to justify the move. The Continental launched into a crossover mania still mushrooming in strength like some Marvel villain, the equivalent of a new dinosaur hatching a few months before the Chicxulub Impact Event. In 18 months, the Continental sold 18,846 units, 12,012 of those sales happening in 2017. In the U.S. this year, sales amounted to 1,573 units through February, about 25 percent down on the annualized monthly rate. It could be worse: The Lexus GS has found 1,009 U.S. buyers so far this year, the Acura RLX, 285. Conversely, the Cadillac XTS — yes, a fleet darling — secured 3,163 sales in the same period. And the German kingpins live in another dimension, with BMW scooting 5,641 5 Series models off dealer lots, and the Mercedes E-Class boasting 8,411 sales of all three variants. Even the much more expensive and much more profitable Lincoln Navigator rang up 2,351 sales in the first 60 days of 2018. That's disheartening reading, especially after Ford reportedly spent more than $1 billion to bring the Continental to market. Sedan segment woes look to have killed the Continental's platform siblings, too, making the Lincoln's demise simply part of the cull. The CD4 architecture also underpins the Ford Fusion and Lincoln MKZ. Ford canceled the Fusion redesign and won't commit to making either vehicle after 2020. Lincoln's passenger car sales declined more than 30 percent last month; meanwhile, Lincoln needs to spend its money on the crossovers that are selling, and investment in the coming three-row Aviator that will replace the MKT. Ford has a CD6 platform in development that suits front-, rear-, and all-wheel-drive vehicles. Under previous CEO Mark Fields, a new Fusion, Mustang, and MKZ would ride on the CD6, as well as the new Explorer and a Lincoln brother. Those plans left with the previous administration, and company sources told both Ford Authority and The Truth About Cars not to expect a Continental revival on that architecture. Related Video:

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.