***** 2012 Ford Econoline 15 Passenger Van ***** on 2040-cars

Auto blog

Creations n' Chrome Top Notch Mustang is a one-of-a-kind fox

Is there a cooler car from the 1980s and early 90s to mod than a Fox-body Ford Mustang? No, there isn't. If you disagree with us, we suggest you have a look at this 1990 Mustang Coupe, which just might change your mind. Although considering just how extensively modified this car - the Top Notch Mustang from Creations n' Chrome - is, we wonder just how much Ford is left in this old pony.
It rides on a custom race tube chassis that weighs a scant 700 pounds, while carbon-fiber bits and bobs help lower the overall curb weight to a mere 2,400 pounds. When paired with supercharged, 5.0-liter, Aluminator V8 from Ford Racing, the results are, doubtlessly, exciting. 855 horsepower at the rear wheels and 667 pound-feet of torque are available from that force-fed V8 should be just plenty for this car's intended purpose of running in standing-mile competitions.
The Top Notch Mustang is more extreme than just weight savings and a big engine, though. That 5.0-liter is essentially in what's known as a front-mid layout - where the engine is actually behind the front axle. In this case, the 5.0-liter V8 is 17 inches further back than a factory Fox-body, for better weight distribution. As a result, the cabin has been completely overhauled. An SLA front suspension, wheels from HRE, Wilwood brakes and Sparco interior items round out the extensive list of mods.

Ford fixing 130k vehicles in three recalls

Ford is issuing three new safety campaigns that cover a total of 130,801 vehicles in North America, but the company has no reports of accidents, injuries, or fires from any of these issues. The largest of these campaigns covers 128,823 examples of the 2009-2010 Ford Edge and Lincoln MKX that are currently registered or originally sold in rust-prone areas of North America, including 110,636 in the US. On these crossovers, "corrosion under the reinforcement brackets where the fuel tank is mounted" can potentially result in a fuel leak. To fix the issue, dealers will inspect the tank and will repair or replace it as necessary. The affected locations are: Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin; and the Canadian provinces of New Brunswick, Newfoundland and Labrador, Nova Scotia, Ontario, Prince Edward Island, and Quebec. Ford is also recalling 1,906 North American examples of the 2016 Mustang, including 1,900 in the US, because of possible damage to some components during shipping to the factory. On the affected pony cars, "dealers will replace front and rear seat belt assemblies, rear seat buckle assemblies, and child tethers," the company says in its statement. Finally, the smallest campaign is for 72 units of the 2016 Ford E-Series cutaway and chassis cab in North America, including 65 in the US. On these, the trailer brakes don't activate when pressing the brake pedal, and dealers need to update the powertrain control module software. Related Video: FORD ISSUES TWO SAFETY RECALLS AND ONE SAFETY COMPLIANCE RECALL IN NORTH AMERICA DEARBORN, Mich., Oct. 28, 2015 – Ford Motor Company is issuing two safety recalls and one safety compliance recall in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford Motor Company issues safety recall for certain 2009-2010 Ford Edge and Lincoln MKX vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 129,000 2009-2010 Ford Edge and Lincoln MKX vehicles in corrosion states and provinces in North America for possible corrosion under the reinforcement brackets where the fuel tank is mounted to the vehicle.

Black Zombie electric Mustang launches Blood Shed Motors [w/videos]

As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant. Lightning repeatedly vanquished the darkness like the angriest of strobe lights and thunder shook the building, punctuating the clatter of a heavy Texas rain on the metal roof as the clock ticked away the initial seconds of a rare full moon Friday the 13th. It was then that the Black Zombie came to life for the first time. Beneath the hood of this rust-free 1968 Mustang fastback, a 289-cubic-inch V8 no longer turns gasoline into heat, noise and pollution. As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant, and now boasts twinned Warp 11 DC motors and a pair of fresh Zilla controllers that will serve as the basic blueprint for future vehicles. Dubbed the Zombie 222 drivetrain, the setup will be limited to 750 horsepower in customer's cars to keep the maintenance experience low, and eventually will draw power from a 40-kWh battery pack. In this first example, though, the output is bit more extreme. For one day, at least, they have the 1,500-kW-capable pack that powers the record-setting Swamp Rat 37 racer belonging to Don Garlits and a brief window of opportunity to try it out on a track. Blood Shed Motors is the result of a collaboration between NEDRA co-founder John "Plasma Boy" Wayland, the man who helped bring electric vehicle drag racing to the attention of the world with his unassuming White Zombie Datsun 1200 conversion and Austin, TX business man Mitch Medford, who've put together a small team of experts in their chosen fields. The plan is to build a limited number of muscle car conversions on pristine early Mustang, Camaro, and Barracuda platforms. The plan is to build a limited number of high-quality muscle car conversions on pristine (No restored rust buckets!) early Mustang, Camaro, and Barracuda platforms. Each can be customized according to buyer's wishes and blessed with its own serial number. The price tags will be in the eye-watering $200,000-and-up neighborhood, reflective of the cost and rarity of these cars and the custom nature of the alterations. Of course, you can't just multiply horsepower and add the monster torque that these electric motors put out and expect an antique chassis to hold up.