(no Reserve) 2003 Ford Crown Victoria Police Interceptor Sedan 4-door 4.6l on 2040-cars

Auto blog

Ford Mustang EcoBoost has fake engine soundtrack

The 2015 Ford Mustang EcoBoost represents a huge change for the Blue Oval as the first pony car in decades to be available with a four-cylinder engine. But a recent tweet (below) from Road & Track raised our curiosity about the new vehicle. Editor Jason Cammisa pulled a fuse while driving the latest 'Stang with the 2.3-liter EcoBoost engine, and he found that both the stereo and engine went quiet in the cabin. That indicated the coupe might have some form of artificial engine sound being piped in - a feature not previously heavily reported for the model. Autoblog spoke with Ford engineer Shawn Carney who confirmed that only the turbocharged four-cylinder Mustang comes with this system, called Active Noise Control.
@jasoncammisa pulls fuse 27 on 4cyl #2015mustang EcoBoost. Both stereo & engine go quiet. #FakeEngineNoise #busted! pic.twitter.com/WNzQefCbtQ

- Road & Track (@RoadandTrack) September 17, 2014

Bodie Stroud seriously updates the 1956 Ford F-100 into the BSI X-100

If you thought pickups could use a lot more love in the resto-mod world, then Bodie Stroud – he of "The Real Thing" Mustang – has something for you: the BSI X-100. His team starts with the body of a 1956 Ford F-100, but the sheetmetal is about all the nostalgia you're going to get; the body, tweaked with a chopped hood and a larger rear window on the cab, sits on a custom steel ladder-frame chassis. Out back is a one-piece, tubbed bed, and behind that are taillights from a 1948 (gasp!) Chevrolet. Under that hood is either a 412-horsepower, 5.0-liter Ford Racing Coyote crate engine, or a supercharged, 6.0-liter, 630-hp Ford Racing Aluminator motor, shifting through a Ford 4R70W four-speed automatic. Inside, the dash is reworked to fit gauges from a Ford F-150 King Ranch Edition, and the bench is swapped out for buckets from a Mustang GT. The independent front and four-link rear suspension are adjustable, helping to make room for staggered wheels - 19 inches in front, 20 inches in back, and larger can be accommodated. Six-piston Wilwood brakes handle the stopping. There's a lot of fabrication and hand-work involved, and it doesn't come cheap: BSI says the turnkey package starts at $180,000. If you've got it, this is an exceptional way to flaunt it. The press release below has all the details. THE BSI 1956 X-100: TIMELESS LINES, MODERN TECH New pickup from Bodie Stroud Industries melds the iconic style of the 1956 F-100 with a cutting-edge chassis and drivetrain to create a hand-built, all-new truck with the performance and reliability of a modern sports car. Sun Valley, Calif. (March, 2015) – In an era when anyone can walk into a dealership with good credit and a yearning to go fast and drive out in a 500+ horsepower sports car, owning and driving something truly unique has become a challenge. With that in mind, the craftsmen at Los Angeles-based Bodie Stroud Industries (BSI) have come up with something truly special – a brand new line of hand-built, turn-key pickups with the looks and sheet metal of an American icon, subtly massaged and fitted to a modern chassis and powered by the latest engine, transmission and electronics from Detroit. The result is the world's first all-new, turn-key 1956 Pickup: the BSI X-100. "When most people think about classic trucks, what comes to mind is usually the 1956 F-100, it's one of the most timeless designs of all time," says BSI founder Bodie Stroud.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.