09 Gt 4.6lv8 5-speed Automatic Leather 12k Low Miles Satellite Radio Cruise on 2040-cars

Auto blog

2021 Ford Escape PHEV finally reaches dealers

Last October – which feels like both five minutes and five years ago – Ford had to push the Escape PHEV sales date back to this year. The holdup arose because Ford had to recall the Escape's European twin, the Kuga PHEV, over a fire risk thought to center on the high-voltage battery. At the time, a Ford spokesperson said, "We are moving full scale production of Escape PHEV to the 2021 model year. The first Escape PHEVs will be sold next year." With just three months left in 2021, a Ford spokesperson confirmed to Ford Authority that the Escape PHEV has finally made it to dealer lots. The end of the Escape PHEV's long and winding road comes about a week after the Lincoln Corsair Grand Touring reached dealers. The compact luxury plug-in hybrid debuted at the 2019 LA Auto Show and was intended to go on sale in the summer of last year. But because it uses the same powertain as in the Escape, Ford had to delay the Lincoln as well.  Now that you can finally buy them, here's the quick recap. Both start with a naturally aspirated 2.5-liter inline-4 and an electric motor powering the front wheels, and a 14.4-kWh battery providing juice. The Escape makes 200 horsepower, can go 37 miles on all-electric driving, is EPA-rated at 105 miles per gallon equivalent (MPGe), and returns a combined 40 mpg if the battery's dead. It starts at $34,320 before incentives. The Lincoln adds an electric motor with a single-speed transmission to power the rear wheels, as Toyota has done with the all-wheel-drive Prius, RAV4 Hybrid and Lexus UX250h. Output in the Lincoln is 266 ponies, it manages 28 miles on pure electric driving, is EPA rated at 78 MPGe, and returns a combined 33 mpg on gasoline alone. It starts at $51,485 before incentives. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Ford GT heading back to Le Mans [w/video]

Ford is set to return to endurance sports car racing, and return in a big way. Announced this morning at Le Mans, the Blue Oval will be entering a version of the new Ford GT in endurance racing series on both sides of the Atlantic. The highly accomplished Chip Ganassi Racing with Felix Sabates team will field the Ford GT next season in the LM GTE Pro class in both the FIA World Endurance Championship and in the United SportsCar Championship, culminating in a four-car entry at next year's 24 Hours of Le Mans. That will mark the 50th anniversary of Ford's landmark victory at Le Mans in 1966. The pivotal, dominant one-two-three finish lead to a further three back-to-back wins with the legendary GT40 - the historic progenitor of the new GT revealed in Detroit earlier this year. Ford isn't saying much about the technical specs underpinning the new competition-spec GT developed with Multimatic, but it's expected to follow closely along the lines of the road-going supercar we've already seen. That includes the 3.5-liter EcoBoost V6 developed in conjunction with Roush Yates and which has already proven a winner in Daytona Prototypes. We also know that the crazy diffuser you see here will be part of 2016's regulations. Look for the new Ford GT racer to mark its debut in January in the Rolex 24 at Daytona. In the meantime, you can scope it out in the high-resolution image gallery above, the video below and the press release at bottom. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Ford Returning to Le Mans in 2016 with All-New Ford GT, Marking 50th Anniversary of 1966 Victory - Ford returns to Le Mans in 2016 with the all-new Ford GT supercar to compete in LM GTE Pro class, commemorating the 50th anniversary of Ford's 1966 overall victory - All-new Ford factory program to compete in both the FIA World Endurance Championship and TUDOR United SportsCar Championship with a two-team, four-car effort – operated by Chip Ganassi Racing with Felix Sabates - Ford GT is company's showcase for aerodynamics and lightweight carbon fibre construction, along with new twin-turbocharged Ford EcoBoost V6 – most powerful EcoBoost production engine ever LE MANS, France, June 12, 2015 – Ford announced today it is returning to one of the most prestigious automobile races in the world with its new Ford GT race car, based on the all-new ultra-high-performance supercar that goes on sale next year.

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.