1990 Ford Bronco Ii Xl Sport Sport Utility 2-door 2.9l on 2040-cars

Auto blog

Ford investing $500M in engine plant for 2.7L EcoBoost production

Ohio is a hot area for Ford at the moment with the announcement just a few weeks ago that production of the next-generation F-650/F-750 medium-duty trucks would move from Mexico to the Ohio Assembly Plant in Avon Lake, Ohio. Now, Ford is investing $500 million to hire 300 workers at its Lima Engine Plant in Lima, Ohio, to add production of the twin-turbo 2.7-liter EcoBoost V6 for the 2015 F-150.
The latest investment will be used to add a new flexible engine assembly system and renovate 700,000 square feet of the plant for machining and assembly areas. The Lima factory already builds Ford's 3.5-liter and 3.7-liter Duratec V6 engines. The plant opened in 1957, and it's on track to build its 40 millionth engine later this year.
Ford claims that the 2.7-liter EcoBoost will offer V8 performance with better efficiency in the F-150. It comes standard with intelligent stop/start that doesn't activate when the truck is towing or in four-wheel drive, and it's made from a combination of compacted graphite iron and aluminum for low weight and high strength. The company says that V6 engines have already proven popular in the F-150 with 57 percent of trucks in 2014 being equipped with either the naturally aspirated 3.7-liter or turbocharged 3.5-liter EcoBoost engines.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

2017 Ford Super Duty trucks recalled because the fuel tank could fall off

Bad news from Dearborn. Ford just announced a pair of recalls, including a particularly worrying flaw in the new F-Series Super Duty. According to Ford's official announcement, there are roughly 8,000 of its big trucks on the roads with a missing reinforcement bracket – if it's not there, the fuel tank could separate from the frame. Yes, Ford is basically saying the fuel tank could fall out. We don't need to explain why this would be a very bad thing. Fortunately, no owners have experienced said bad things – Ford claims it's unaware of any fires, injuries, or accidents resulting from the flaws. The Kentucky Truck Plant built the affected pickups between August 10 and September 17. The bulk of the vehicles are in the US – 7,103, to be precise. Another 964 are cruising around the frozen Canadian tundra, while two more are in "federalized territories." The other recall is smaller, but reaches across a broad swath of the Blue Oval's family vehicles. Ford says there are 1,352 Taurus sedans, Flex crossovers, Explorer SUVs – including the Police Interceptor Utility variant – and Lincoln MKTs equipped with the company's 3.5-liter EcoBoost V6 that could catch fire. In this case, the danger isn't a detached fuel tank, but an "improperly brazed turbocharger oil supply tube" that could leak and spill engine oil on the turbocharger. Again, Ford isn't aware of any fires, accidents, or injuries due to the flaw. Here's the breakdown of manufacturer dates and location: 2016 Ford Taurus vehicles built at Chicago Assembly Plant, Oct. 18, 2016 to Nov. 2, 2016 2016-17 Ford Flex vehicles built at Oakville Assembly Plant, Oct. 18, 2016 to Nov. 10, 2016 2017 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 15, 2016 to Nov. 12, 2016 2017 Ford Police Interceptor Utility vehicles built at Chicago Assembly Plant on Nov. 2, 2016 2016-17 Lincoln MKT vehicles built at Oakville Assembly Plant, Oct. 18, 2016 to Nov. 10, 2016 As with the Super Duty recall, most of the affected cars, crossovers, and SUVs are in the US market. There are 126 units in Canada and six in the same "federalized territories" mentioned above. In the case of both recalls, dealers will inspect the affected parts and replace or add them as necessary. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.