2011 Ferrari 458 Italia Grigio Silverstone Penske Wynn Ferrari 702-770-2000 on 2040-cars

Auto blog

Ferrari California T is a topless turbo turismo

As expected, Ferrari has today officially pulled the covers off the latest version of its front-engined California grand tourer ahead of the car's impending live debut at the Geneva Motor Show. The headline news, again as expected, is a new 3.9-liter turbocharged V8 engine. Ferrari promises zero turbo lag from its innovative new engine, which is rated at 560 horsepower and 557 pound-feet of torque.
That's 70 more horses than the last California, which, coupled with its 49-percent increase in torque, allows the new California T to accelerate from 0-62 miles per hour in 3.6 seconds. Fuel mileage is improved by 15 percent, and emissions are down 20 percent. Also, for what it's worth, Ferrari promises "the most exhilarating soundtrack any turbo has ever yielded." Sounds pretty good to us...
There's plenty more of interest besides the new turbocharged engine, such as the retractable hardtop that turns the four-seater into a convertible in 14 seconds, improved steering response, reduced roll and pitch when cornering and carbon-ceramic brakes.

Ferrari recalling 814 models from 2015 for airbag problem

Recalls from small-volume, high-end automakers like Ferrari are fairly rare, but the Prancing Horse issued a safety campaign to repair 814 vehicles in the United States due to a potential problem with the driver's side airbag module. The issue covers the 2015 editions of the 458 Italia, 458 Spider, 458 Speciale, 458 Speciale A, California T, FF, F12 Berlinetta, and LaFerrari. The affected examples have build dates from Dec. 19, 2014, to April 29, 2015, but this isn't every MY2015 vehicle in the country. According to the announcement by the National Highway Safety Administration (here as a PDF), these Italian supercars might have a "relevant combination of insufficient gluing of the leather on the driver's side airbag cover and the possible rotated installation of the driver's airbag cushion in the airbag module." In the event of a deployment, the safety devices might come out turned from where they are supposed to be. This issue could cause an increased risk of injury in a collision. In the NHTSA documents, Ferrari reports that it believes the chances of these rotated deployments are low. For drivers' safety, dealers will still replace the affected airbag module with a new one. Owners will start having their supercars fixed around July 30. RECALL Subject : Improperly Assembled Drivers Air Bag Report Receipt Date: JUL 07, 2015 NHTSA Campaign Number: 15V433000 Component(s): AIR BAGS Potential Number of Units Affected: 814 All Products Associated with this Recall Vehicle Make Model Model Year(s) FERRARI 458 2015 FERRARI CALIFORNIA T 2015 FERRARI F12 BERLINETTA 2015 FERRARI FF 2015 FERRARI LAFERRARI 2015 Details Manufacturer: Ferrari North America, Inc. SUMMARY: Ferrari North America, Inc. (FNA) is recalling certain model year 2015 Ferrari 458 Italia, 458 Spider, 458 Speciale, 458 Speciale A, California T, FF, F12 Berlinetta, and LaFerrari vehicles manufactured December 19, 2014, to April 29, 2015. The affected vehicles may be equipped with a driver side air bag module that was improperly assembled. This can cause the air bag to deploy in a rotated orientation. CONSEQUENCE: In the event of a crash, the deployment of the driver's air bag in a rotated orientation increases the risk of injury. REMEDY: FNA will notify owners, and dealers will replace the front Driver's Side Air Bag Module, free of charge. The recall is expected to begin on July 30, 2015. Owners may contact Ferrari customer service at 1-866-551-2828. Ferrari's number for this recall is 57.

Ferrari P80/C one-off built for 330 P3/P4, 1966 Dino 206 S fanatic

For more than four long years, one person has kept a major secret with Ferrari. The company and the client were working on a project that Ferrari calls its "most extreme one-off design ever." Inspired by the 330 P3/P4 and the 1966 Dino 206 S, the P80/C is a new-age take on a track-focused sports prototype. Typically for these types of specialty builds, Ferrari does as they've done in the past and reshapes a new exterior over an existing car from the for-sale lineup. But because it is a track car, Ferrari used the 488 GT3 as a starting point, and made "radical changes" to the equipment from there. It not only has a slightly longer (about two inches) wheelbase than the 488 GTB, but it also has a cab-forward design rather than the 488 GTB's centrally located cabin. Ferrari says this allowed for more creative freedom and played a major part in how the design took shape. Flavio Manzoni and the Ferrari Styling Center set out to make what they described as a "Hero Car." The client's direction was to make a "modern sports prototype" with design cues from the 330 P3/P4 and the 1966 Dino 206 S. These two cars carry significance in Ferrari's design history, as they impressed on the track but also influenced future road cars such as the Dino 206/246 GT. With heavy involvement from the client during the process, Ferrari has been working on this car since 2015, the longest the company has ever spent on developing a one-off. Starting from the ground up, aerodynamics played a major part in the appearance of the P80/C. A gigantic front splitter, which is specific to this car, snuggles the ground and extends beyond the dimensions of the body. Visually, it carries on along the flanks with aero skirts, and circles around the rear with a bulky exaggerated diffuser. The lower kit is left in exposed carbon fiber, creating a two-piece look that's separate from the Rosso Vero body paint. Ferrari says only pieces that were strictly functional were highlighted with bare carbon and that the car has a five percent aerodynamic improvement over the 488 GT3. For the designers, the P80/C was a safe space of opportunity and experimentation. It is a track car that does not fall under racing regulations, but it's also a customer production car that is not forced into road-ready restrictions.