2013 Srt Viper Gunmetal With Track Package on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Dodge Hellcats change their stripes for 2016

If you've been on the fence about ordering up a new Dodge with Hellcat power, this might just provide the extra incentive you were looking for. Starting this month, Dodge is offering a new stripe option, exclusive to its most powerful muscle cars. The SRT Hellcat stripes are now available to order on the top-of-the-line, 707-horsepower versions of both the Charger and Challenger. The dual full-length stripes run all the way up from the front lip, over the grille, up the hood, accentuating the NACA duct, along the roof, down the trunklid, across the rear spoiler, and down the rear bumper. They feature a carbon-fiber texture, and can be ordered with any of eleven colors for an extra $995. Along with the stripes, Dodge has also announced that it is extending the availability of the exclusive Plum Crazy color – which was originally scheduled to expire at the end of December – for another month. The throwback hue can be ordered on Charger and Challenger models ranging from the SXT through the R/T models all the way up to the SRT 392 and Hellcat. 2016 CHALLENGER AND CHARGER SRT HELLCAT MODELS EARN EXCLUSIVE STRIPES, DODGE EXTENDS PLUM CRAZY PAINT - All-new SRT Hellcat dual exterior stripe design adds even more Dodge attitude to 2016 Challenger and Charger SRT Hellcat models - SRT Hellcat-exclusive dual full-length carbon-fiber pattern stripes provide a customized-from-the-factory look - Dealers will start taking orders for Hellcat stripes in January 2016 - SRT Hellcat dual stripes have a U.S. Manufacturer's Suggested Retail Price of $995 - Dodge is answering enthusiast demand for Plum Crazy exterior paint with an additional one-month run of the legendary and limited-edition high-impact hue January 8, 2016 , Auburn Hills, Mich. - For more than a year, Dodge Challenger and Charger SRT Hellcat models — the fastest and most powerful muscle cars ever with 707 supercharged HEMI® horsepower each — have stormed roadways and drag strips with acceleration blasts to 60 mph in the low 3-second range, generated more than 61 million sensational YouTube video views around the globe, enabled an entirely new generation of Dodge enthusiasts and now for 2016 have been rewarded with their very own Dodge performance stripes.

Next Dodge Challenger to be electrified, says FCA boss

Dodge is the last of Detroit's Big Three to truly keep the muscle car purpose and heritage alive with the Challenger and Charger. As the Mustang and Camaro have transitioned to sports car-like experiences, the high-horsepower Dodges have stuck to their guns as straight-line behemoths with little intention of competing with the others in corner carving. People still dig the old-school-cool of cars like the Challenger, as sales actually went up while Mustang and Camaro sales took a hit in 2018. That said, new FCA boss Mike Manley said things will be changing in an electric way for the next generation, in a report by The Detroit News. "The reality is those platforms and that technology we used does need to move on. They can't exist as you get into the middle-2020s. New technology is going to drive a load of weight out, so we can think of the powertrains in a different way. And we can use electrification to really supplement those vehicles." News of electrified muscle cars is nothing new at this point. Ford says it's going to reveal a Mustang Hybrid in 2020. And with Al Oppenheiser (former chief engineer for the Camaro) moving to GM's electric division, you better believe Chevrolet is working on an electrified version of the Camaro. This, however, is the first solid evidence we have that FCA and Dodge are making such a move. What Manley said next is something we all know to be true, but a bit heartbreaking nonetheless. "I think that electrification will certainly be part of the formula that says what is American muscle in the future. What it isn't going to be is a V8, supercharged, 700-horsepower engine," Manley says. Even if it's a bit silly, we all love the Hellcat for its 707 horsepower V8. Clearly, plenty of other people do, too, because Dodge keeps cranking out more insane versions of the car with the Redeye and Demon. As for how much electrification Dodge's muscle car will receive, Manley wouldn't go into detail. Though he does say that electrification "can't be the dominant part." This should provide some solace to all those worried the gasoline engine could disappear from the American muscle car. Just as Dodge is reluctant to stray from the original intent of the muscle car, it's not hard to imagine the Challenger/Charger being the last to go full-electric. Gas engines supplemented by 48-volt systems or plug-in hybrids will most likely be the end result when we first see electrified Challengers.