2004 Dodge Viper 2dr Convertible Srt10 on 2040-cars

Auto blog

FCA adds 88k Dodge Challengers to Takata inflator recall

The Takata airbag inflator recall from FCA US is growing 88,346 vehicles larger in the US after the company's discovery of the faulty parts in the 2008-2010 Dodge Challenger. The affected examples have production dates between September 19, 2007, and October 29, 2010, and the coupes need the replacement components on the driver's side. According to chronology posted by the National Highway Traffic Safety Administration (as a PDF), the automaker was auditing the models covered under the campaign in July and "identified a population of vehicles that was inadvertently excluded." Initially, FCA believed these cars were using an unrecalled Takata inflator. The audit revealed that the affected cars indeed used a recalled version. As with the rest of the faulty parts, exposure to moisture can cause them to ignite too quickly during an airbag deployment and spray shrapnel at occupants. The problem has been linked to at least eight deaths worldwide and a vehicle fire in Japan. The Challenger wasn't previously part of FCA's 3.3-million unit national campaign or the subsequent expansion. According to FCA US the parts to complete the repairs in these Challengers aren't currently available. However, owners will be notified of the issue by mail starting August 14. They will receive a second notice when the parts become available. Related Video: RECALL Subject : Driver Side Frontal Air Bag Inflator May Rupture Report Receipt Date: JUL 10, 2015 NHTSA Campaign Number: 15V444000 Component(s): AIR BAGS Potential Number of Units Affected: 88,346 All Products Associated with this Recall Vehicle Make Model Model Year(s) DODGE CHALLENGER 2008-2010 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. Parts to remedy the vehicles are not currently available. Interim notices will be mailed to owners beginning August 14, 2015.

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.

Dodge explains why it will build the Durango SRT Hellcat for only six months

Dodge will manufacture the 710-horsepower, Hellcat-powered Durango SRT only for approximately six months. The company explained that, while it won't stop production after building a pre-determined number of SUVs, it won't be able to extend the model's life cycle due to several manufacturing- and government-related hurdles. "The Durango SRT Hellcat is not limited, it's not serialized like what we did with the Challenger SRT Demon, but we're only building it for six months. With all of the changes we made in the plant to come back up to production post-COVID-19, with the sequencing and spacing in the plant, it's changed the numbers we can build," explained Tim Kuniskis, the head of Dodge, in an interview with enthusiast website Muscle Cars & Trucks. He added no one on his team knows precisely how many SUVs the Jefferson North factory on the outskirts of Detroit will put a Hellcat engine into. It largely depends on customer demand. Asked to provide an estimate, Kuniskis revealed he expects "less than 2,000" units will be made. They will all be 2021 models. In theory, Dodge could at least double that number by bringing the Durango SRT Hellcat back for the 2022 model year. It's not that simple in application, however, because the company won't be able to drop a supercharged, 6.2-liter V8 in its biggest SUV after 2021 without leaning on the wrong side of looming emissions regulations. "When we switch to the 2022 model year, there are new evaporative emission requirements that come in that the Hellcat engine does not meet in that platform," Kuniskis said. He also noted the Jefferson North factory will be busy retooling for production of the next-generation 2021 Jeep Grand Cherokee tentatively due out in 2020. Still speaking to Muscle Car & Trucks, Kuniskis clarified that the Hellcat-powered variants of the Charger and the Challenger will stick around in the foreseeable future; making them compliant with the upcoming emissions regulations is easier. And, he stressed the standard version of the Durango will carry on "completely interrupted." In other words: Act fast if you want a Durango SRT Hellcat. Dodge will begin taking orders in the fall of 2020, and production is scheduled to start in early 2021, with deliveries following shortly after. Pricing information hasn't been announced yet, but we expect its base price will be pegged in the vicinity of $90,000. Related Video: