2003 Dodge Viper Srt-10! Only 17k Mi! Exc Cond! Upgrades! on 2040-cars

Auto blog

NHTSA investigates a million-plus Jeep Cherokees for parking brake issue

The National Highway Transportation Safety Administration (NHTSA) is investigating a potential safety issue that could be present in more than 1 million Jeep Cherokees sold for the 2014-2020 model years. Per owner complaints, these cars may be equipped with an electronic parking brake control module that is susceptible to water intrusion. If the water causes a short, it can result in uncommanded activation of the parking brake while the vehicle is in motion, which can lead to a stall, NHTSA says.  If you follow Jeep Cherokee news closely (and who doesn't?), this issue may ring a bell. That's because Jeep was on the hook for recalling the Cherokee for water intrusion into the liftgate control module, which is fitted right next to the parking brake module. In that instance, short circuits had the potential to cause a fire, which has not so far been indicated as a potential side effect of the new parking brake issue, but any time electricity is involved, there's usually at least some risk for ignition.  The Cherokee is just one of four Stellantis models with a new open investigation, the Detroit Free Press reported Tuesday. NHTSA is also looking into reports of a transmission problem that could strand owners of 2019-2021 Chrysler Pacifica plug-in hybrid minivans and a crankshaft and/or camshaft position sensor problem that could cause a stall in the 2016 Dodge Journey and Jeep Compass. Between the two, these investigations cover an additional 300,000 vehicles.  None of these vehicles are being recalled at this point, however a NHTSA investigation is the first major step toward a recall being initiated. The regulator will work with Stellantis to determine whether a recall is necessary.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Government/Legal Chrysler Dodge Jeep Ownership Safety SUV

Weekly Recap: New bosses try to jump-start Cadillac and Lincoln

Both of America's domestic luxury brands seem to be stuck in neutral.
It's ironic that Cadillac and Lincoln got new bosses within days of each other this month. It's also a commentary on the fact both of America's domestic luxury brands seem to be stuck in neutral.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.