2003 - Dodge Viper on 2040-cars
Poughkeepsie, New York, United States

Dream car a black low mileage 2003 Dodge viper SRT-10. The Viper currently has 17,XXX miles and is 15 off the assembly line in 2003. The Car put down 658hp and 654rwtq on a conservative tune at 6.5lbs of boost. I have all the receipts for the Paxton install, clutch, and other supporting mods. All fluids have been changed and car was professionally detailed as well. The car has an older style BBK throttle body that needs to be changed or adjusted. The car idles at 1200 after warmed up. This Viper has the following mods. ~Paxton Supercharger with 6lb pulley (13,411) ~VEC 2 Stand Alone (1500) ~Snow Performance Stage 2 Water Methanol Injection- Owner paid extra to use factory windshield washer reservoir ~B&B Stepped headers (3,500) ~Corsa Track exhaust system (1250) ~Centerforce Dual Friction Clutch ~ Aluminum Flywheel ~ Tinted windows 20% ~ Tinted Tail lights (Can be removed) ~ Eibach Springs and Caps ~ Center Consol is wrapped in di noc CarbonFiber ~ Orange Stitched Shifter boot from Dodge dealership ~Orange stitched E-Brake boot from Dodge Dealership ~ MGW Chrome Gauge Bezels ~ MGW License plate Frame ~ MGW first Strike Shifter ~ 2005 CopperHead Viper Side badges ~ Calipers Painted 2005 Copper Head Orange with black VIPER letters. ~Brand new with less then 500 miles 360 Forged Spec 5 wheels. The lips are Chrome and the centers and inner barrels are brushed and clear coated. The fronts are 20x10 with 295/25RO Nitto Invos, and the rears are 20x13 with 345 25/20R0.
Dodge Viper for Sale
2004 - dodge viper(US $11,000.00)
Dodge viper srt-10 coupe 2-door(US $22,000.00)
Dodge viper srt-10 convertible 2-door(US $2,000.00)
Dodge viper rt 10(US $10,000.00)
2001 - dodge viper(US $22,000.00)
1993 - dodge viper(US $13,000.00)
Auto Services in New York
Westchester Toyota ★★★★★
Vision Dodge Chrysler Jeep ★★★★★
Village Automotive Center ★★★★★
TNT Automotive ★★★★★
Sterling Autobody Centers ★★★★★
Sencore Enterprises ★★★★★
Auto blog
Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats
Tue, Nov 1 2016When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.
Fiat Chrysler Automobiles recalls nearly 750k vehicles in two campaigns
Thu, 16 Oct 2014Fiat Chrysler Automobiles is recalling a total of 747,817 vehicles in the US in two separate campaigns recently added to the National Highway Traffic Safety Administration database.
The first one covers about 434,581 units of the Chrysler 300, Dodge Charger, Challenger, Durango, and Jeep Grand Cherokee from the 2011-2014 model years with electric hydraulic power steering, the 3.6-liter V6 engine and a 160 amp alternator, according to FCA. In the affected vehicles, it's possible for the alternator to fail without warning and possibly cause the car to stall. According to the documentation submitted to NHTSA, the automaker began investigating the problem in August 2014 and has found possible evidence of one crash caused by the failures but no known injuries.
Customers will begin receiving notification about the recall next month, and obviously the repairs will be done at no cost to them.
Stellantis reveals STLA Large platform with EV and ICE support
Fri, Jan 19 2024Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.