1996 Dodge Viper Base Convertible 2-door 8.0l on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon sheds seats and insulation to drop weight

You've probably already heard that the 2018 Dodge Challenger SRT Demon will be lighter than the Hellcat Challenger – to tune of more than 200 pounds. What you probably don't know is that the Dodge team did it by dropping most of the seats, along with a few other tricks. The Demon loses 113 pounds by making the front passenger seat with its seatbelt (58 pounds) and back seat (55 pounds including restraints and floor mats) optional, which accounts for a large chunk of the weight loss compared to the Hellcat. The Demon also has unique 18-by-11-inch wheels, which are 16 pounds lighter than the Hellcat's, a manual tilt/telescope steering column instead of the powered one, which loses four pounds, and an 18-pound loss thanks to removing 23 noise, vibration, and harshness parts (the Demon will not be a quiet car, to say the least). Another 20 pounds is lost removing the trunk interior trim and spare tire. Still, the Demon gains 17 pounds thanks to the wide fender flares that accommodate the massive drag radials, which also add 3.5 inches to the car's width. For reference, the lightest Hellcat weighs 4,448 pounds with a manual transmission, and the automatic-equipped car comes in at 4,455 pounds. The Demon will be revealed in April before the New York Auto Show, and Dodge will continue to tease its latest satanic muscle couple weekly until then. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2015 Dodge Challenger Drag Pak previewed

Dodge and Mopar have never strayed far from success in drag racing, be it on run-what-you-brung nights at the local strip or at the highest levels of the sport. Hoping to both add to that heritage and capitalize on some of the media spotlight that's shown so brightly on the brand of late, Dodge has given us our first look at the 2015 Mopar Challenger Drag Pak test car.
Though this first iteration doesn't make use of the 707-horsepower Hellcat engine, it seems to be a pretty formidable racing package. Starting with a stock '15 Challenger, Mopar adds a full roll cage built to National Hot Rod Association specs. Rubber front and back is drag racing-ready as well, with 28x4.5-inch tires in the front, and fat 30x9-inch tires out back - all from Hoosier.
Powering the beast is a massive 426-cubic-inch (7.0-liter) Hemi Race V8, with output levels that are still unspecified. A Chrysler 727 automatic transmission connects up to a racing style shift lever, with integral line lock.

2020 Dodge Challenger Drag Pak will debut at SEMA

Mopar fans have countless reasons to get hyped about the 2019 SEMA show. Speedkore is bringing a twin-turbocharged, all-wheel-drive Dodge Charger Hellcat Widebody, Mopar is bringing a done-up 1968 Dodge D200 "Lowliner," Ram is bringing a diesel 1500 overlander, and Jeep is bringing a custom off-road Wrangler. But the launch of the new 2020 Dodge Challenger Drag Pak might garner the most attention from the brand's most serious customers. Prior to the show, Mopar teased a photo and a short video clip, both showing a new Dodge Challenger from the overhead view. The white Challenger showed a wide blue stripe down the center of the car with two pinstripes along each side. "Powered by SRT" runs across the top of the windshield, and Mopar logos grace both sides of the car just beneath the side windows. Red decals run back from the rear quarter panels and connect across the rear of the car. It also has hood pins on the SRT Hellcat hood and a parachute attached the rear. There's a parachute because this is the factory turnkey drag-race-focused Dodge Challenger racecar. Mopar released no other information on what type of hardware the Drag Pak will be using, or what's under the hood, but the video gives a great preview of the exhaust note in full tire-smoke mode. As some Drag Paks in the past have dropped roughly 1,000 pounds from their production starter vehicles, the 2020 model will surely utilize plenty of weight-savings methods such as the removal of all interior comfort features that don't apply on the racetrack. Mopar has also previously altered the position of the engine and changed the wheelbase to the benefit of better weight distribution. Mopar is set to livestream the unveiling starting at 7:26 p.m. ET (that's 4:26 on the West Coast, which not coincidentally coincides the the displacement of the vintage 426 Hemi engine) on Nov. 5, 2019. Until then, check out the 2009, 2010, 2011, or 2016 Drag Paks.