Sprinter Handicapped Wheelchair Lift Ada Van Gov Owned Handicap 99 Pics Serviced on 2040-cars

Auto blog

Dodge Charger SRT Hellcat in the works

In Autoblog's recent First Drive of the 2015 Challenger SRT with the 707-horsepower Hellcat V8 we found its engine to be as brutally powerful as the numbers would suggest, even if it wasn't the best handler. However, the muscle-car-styling just isn't right for some buyers that need four doors and proper rear seats to haul around the family. It appears that Dodge has their backs, though, because the Hellcat is very likely on its way into the Charger in the near future. Imagine the looks on your passengers' faces when you stomp down on the throttle.
According to Road and Track, when Dodge submitted the Hellcat for engine power certification to the Society of Automotive Engineers, the company included the Charger on the paperwork. That showed that the automaker wanted the engine checked out for the sedan, too. R&T reckons the 707-hp Charger would hit the road about a year from now, clearing the Challenger for a year of exclusivity with the powerplant.
When the Charger SRT Hellcat does hit the road, it may carry a very special accolade. Assuming nothing beats it in the meantime, it might be the world's highest horsepower production sedan. Think on that for a second. Even a Mercedes S65 AMG only has 621 horsepower, though a good bit more torque at 738 pound-feet to the Dodge's 650 lb-ft. So while the beastly engine is getting put into other models, where else would you like to see it? The Ram? Grand Cherokee? Let us know in Comments.

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

Gas prices down, 707-hp engine production up... USA!

On Saturday, the United States of America will celebrate its 239th birthday. That means fireworks, barbecues, block parties, and, oh yeah, Hellcat engines and low fuel prices. The most American of (Mexican-built) powerplants, the big, loud, supercharged, 707-horsepower Hemi is slated for yet another production boost to match up with some serious demand, while the dino juice it runs on is cheaper than it's been in over half a decade. The Saltillo, Mexico engine factory already produces some 4,000 Hellcat engines each year – that's in addition to the Tigershark four-cylinder, the 5.7-liter Hemi, and 6.4-liter SRT Hemi V8s – and it's not entirely clear how many more might get added to that total. What we do know, though, is that Fiat Chrysler can't build the engines fast enough. "We're going to build more [Hellcats] for 2016," SRT boss Tim Kuniskis told Automotive News. "It's a small sliver of what we sell, but it really creates a halo for the rest of the lineup. For example, the next highest car, the Scat Pack Challenger, I have essentially a zero-day supply. It's sold out." This bit of good news comes on the back of something equally good – low summer gas prices. According to the US Energy Information Administration, the nationwide average for for "all formulations" of fuel in June sits at $2.885. Ignoring the remarkably low prices we saw in January and February of this year – figures that themselves hadn't been seen since May of 2009 – the national average hasn't sat that low since October 2010. So yes, it's a very a good time to be an American gearhead. News Source: Automotive News - sub. req., US Energy Information AdministrationImage Credit: US EIA Green Plants/Manufacturing Dodge Fuel Efficiency Coupe Performance Sedan dodge challenger srt tim kuniskis dodge charger srt