2500 Shc Wag 2.7l Am/fm Cloth Interior Surface on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

NHTSA probing Ram recall pace, communication

The National Highway Traffic Safety Administration has announced that it's looking into Chrysler Group's handling of a pair of recalls affecting roughly one million Ram pickup trucks. Reuters is reporting that the regulatory agency is focusing on the availability (or lack thereof) of parts and "poor communications" from the automaker in its investigation.
"Customers have been advised in accordance with the regulations governing recalls," Chrysler spokesman Eric Mayne told Reuters via email. "We are continually replenishing our supply of replacement parts. Chrysler Group regrets any inconvenience our customers may have experienced."
NHTSA disagrees, arguing that the recalls, which affect 972,000 trucks from 2003 to 2012, are being delayed by the lack of parts.

Dodge Durango SRT vs. Jeep Grand Cherokee SRT | Which should you buy?

Choice is a good thing. And when it comes to high-performance sport utility vehicles, there are more choices today than ever before to tantalize buyers into showrooms. And why not? Americans love SUVs, and, while there's a stronger push to go green now than ever before in the history of internal combustion, there's still a large contingent of buyers who firmly believe in choosing the biggest, baddest, most powerful powerplant. For those buyers, the Dodge Durango SRT and Jeep Grand Cherokee SRT are two of the most potent options. But which one should you buy? They both deliver 475 horsepower and 470 pound-feet of torque to all four wheels through an eight-speed automatic transmission. They both do 0-60 in around 4.4 seconds, and both boast top speed numbers that will handily land you in jail if written on a speeding ticket. Choosing between the two, then, is a bit more nuanced than which is faster. That said, the Jeep is probably a bit quicker at the track than the Dodge. We'd wager than the Grand Cherokee SRT's 5,104-pound curb weight (versus 5,510 for the Durango SRT) and 114.8-inch wheelbase (versus 119.8) will pay small dividends in acceleration, cornering, and braking performance. So, if that's the only category by which you believe these SRT-fettled SUVs should be judged, choose the Jeep. View 17 Photos But let's get real here for a moment. As much fun as it is to wrangle a brutish ute 'round a racetrack – and trust us when we tell you it's a blast – the number of hi-po SUV owners who will ever show up at Bondurant in an SRT-badged 4x4 is probably in the single digits. So, when evaluating which of the two Hemi-powered vehicles is right for you, ultimate lap times are probably of little concern. If you're choosing between these two overpowered players, practicality is probably just as important as performance. And in that category, the Durango SRT comes out on top. For starters, the Dodge is a three-row SUV with six seats, whereas the Jeep is a two-row, five-passenger platform. Fold down the rear bench and there's 84.5 cubic feet of cargo area in the Durango, versus 68.7 in the Grand Cherokee. And if you tow, the Durango SRT's 8,600-pound max rating handily bests that of the Grand Cherokee SRT's 7,200-pound capacity. Ask yourself what's most important: performance or practicality. And then consider the price. The Dodge is nearly $4,000 less expensive than the Jeep.