2007 Dodge Sprinter 2500 Base Standard Cargo Van 3-door 3.5l on 2040-cars

Auto blog

The Dodge Challenger 1320 is rarer than the vaunted Demon

Dodge stopped making the 840-horsepower Challenger Demon after the 2018 model year, and it filled the gap the coupe left in its range with a slightly tamer variant called 1320. While it wasn't a limited-edition model, production figures released recently cement its status as a future classic. 1320 references the length of a drag strip, which normally checks in at 1,320 feet, and the name speaks volumes: It was built to go flat-out for a quarter mile. It offered all of the go-fast goodies found in the Demon, including a transbrake, a line lock, an SRT-tuned suspension, plus bigger brakes provided by Brembo, and it swapped the supercharged V8 for a naturally-aspirated, 6.4-liter eight shared with the Challenger 392 and tuned to 485 horsepower. It wasn't quite as quick as the Demon, but it remained a race car barely street-legal enough to put plates on, so it occupied a shallow niche. Dodge made 1,054 examples of the 1320 during the 2019 model year, according to Mopar Insiders. Of those, 1,026 units were sold in the United States, and the remaining 28 stayed in their home country of Canada. As for colors, 232 enthusiasts chose Pitch Black, making it the most popular. At the other end of the spectrum, 13 buyers ordered Maximum Steel, which is the rarest color offered to the public. One 1320 was painted in Yellow Jacket, and another in Billet, but they were pre-production cars. To add context, the firm capped Demon production at 3,300 units, including 300 for the Canadian market. The 1320 is returning for the 2020 model year, so it might ultimately become more common than the Demon, but it remains a rare edition that will turn heads at high-profile classic car auctions in a few decades' time. If you've got one, race it, but pamper it off the track, and hang on to it. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

Trump tells Detroit 3 CEOs he wants more US jobs, calls environmentalists 'out of control'

As expected, President Donald J. Trump met with top executives from FCA, Ford, and General Motors this morning as part of a larger push to generate jobs in America. "I want new plants to be built here for cars sold here!", Trump said in a tweet ahead of the meeting. Not everything said in the meeting was made public, but the President later tweeted that he had a "Great meeting with automobile industry leaders." FCA CEO Sergio Marchionne, Ford chief Mark Fields, and GM's Mary Barra all echoed the positive vibes after the meeting. In a statement, Barra called the discussion "very constructive and wide-ranging," adding that it focused on "policies that support a strong and competitive economy and auto industry," and "that supports the environment and safety." That's noteworthy, because Trump is reported to have said "I am to a large extent an environmentalist. I believe in it, but it's out of control." Fields, speaking to reporters after the meeting, said, "We're excited about working together with the president and his administration on tax policies, on regulation and on trade to really create a renaissance in American manufacturing." The Ford CEO was specifically talking about Trump's withdraw from the Trans-Pacific Partnership. "We've repeatedly said that the mother of all trade barriers is currency manipulation, and TPP failed in meaningfully dealing with that, and we appreciate the president's courage to walk away from a bad trade deal," he said. Marchionne focused on American manufacturing in his statement after the meeting. "I appreciate the President's focus on making the US a great place to do business. We look forward to working with President Trump and members of Congress to strengthen American manufacturing." Perhaps equally as interesting as what was said and who was invited are what wasn't said and who wasn't invited. Trump has been very vocal about his distaste for US automakers' plants in Mexico, but no mention was made of the North American Free Trade Agreement by Trump or any of the Detroit CEOs after the meeting. We also have to wonder if Trump plans to meet with representatives from German, Japanese, and Korean automakers that have made massive investments into American plants and produce a large number of cars in this country. Related Video: News Source: Reuters, General Motors, Fiat Chrysler Automotive, Donald J.