Dodge Ram Conversion Van Regency Power Rear Sofa Cold A/c Clean No Reserve on 2040-cars
Philadelphia, Pennsylvania, United States
Body Type:Minivan, Van
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Dealer
Make: Dodge
Model: Ram Van
Warranty: Vehicle does NOT have an existing warranty
Mileage: 133,265
Sub Model: 1500 109" WB
Options: Cassette Player
Exterior Color: Other
Interior Color: Tan
Dodge Ram Van for Sale
2000 dodge ram 3500 van base standard cargo van 3-door 5.9l(US $2,450.00)
Handicap van, wheelchair lift, conversion van, low miles
Handicap van, wheelchair lift, conversion van, low miles(US $7,500.00)
1994 dodge ram van b 250,7 passengers,run great,no reserve price auction@@@@@@@@
2002 dodge ram van 350 hi-top,extended handicap and transport.ready to go(US $5,500.00)
Auto Services in Pennsylvania
Wright`s Garage ★★★★★
Williams, Roy ★★★★★
West Tenth Auto ★★★★★
West Industrial Tire ★★★★★
United Imports Inc ★★★★★
Toms Auto Works ★★★★★
Auto blog
The Dodge Demon was developed under a cloud of smoke
Tue, Jun 6 2017The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.
Dodge recalls 121,603 examples of Dart for loss of brake assist
Fri, Dec 4 2015Dodge will recall 121,603 worldwide examples of the 2013-2014 Dart with the 2.0- and 2.4-liter engines because of possible loss of power brake assistance. The company reports two minor injuries and seven accidents potentially related to this problem. The affected models have build dates before Jan. 24, 2014. There are 105,458 of these vehicles in the US; 11,996 in Canada; 3,705 in Mexico; and 444 outside of NAFTA. This campaign doesn't affect Darts with the 1.4-liter engine. These vehicles' brake-booster vacuum tube routing can potentially allow oil to access and eventually to degrade the brake booster diaphragm. If this happens, then the vehicles could lose braking assist. The brakes themselves would continue to work, but the driver would experience longer stopping distances. A pop or similar sound of a vacuum leak sometimes precedes the problem, according to the automaker. Dealers will inspect the components and replace the vacuum tube. If technicians find oil in the tube, they'll also swap out the vacuum pump, brake booster, and master cylinder. Affected owners will receive notice from the company within the next 60 days. Statement: Vacuum-tube Assembly December 3, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 105,458 compact sedans in the U.S. to inspect and replace vacuum-tube assemblies and certain other components, as required. Some of the affected vehicles may be subject to oil migration that could affect their brake systems' power-assist feature. Foundation brake function is unaffected. However, if this condition occurs, the driver may notice hard pedal-feel on brake application, and longer distances may be required to stop the vehicle in emergency situations. An FCA US investigation identified certain model-year 2013-14 vehicles equipped with 2.0-liter and 2.4-liter engines, may have brake-booster vacuum-tube routing that inadvertently allows oil to reach the brake booster diaphragm, if ever the vacuum-pump check valve fails. Oil may degrade the diaphragm and lead to a loss of brake-assist – a feature that helps reduce stopping distances. FCA US is aware of two minor injuries and seven accidents that are or may be related to this condition. The recall is limited to model-year 2013-14 Dodge Dart sedans produced before Jan. 24, 2014. It also affects an estimated 11,996 cars in Canada; 3,705 in Mexico and 444 outside the NAFTA region. Vehicles equipped with 1.4-liter engines are excluded.
2019 Dodge Charger SRT Hellcat gets a Challenger-style intake in the grille
Wed, May 9 2018Yesterday, we discovered that Dodge was working on some sort of update to the nose of the Charger Hellcat. Today, Dodge revealed what the change is. It's a new grille with an intake outlet. Basically, the 2019 Dodge Charger SRT Hellcat will have the equivalent of the Challenger Hellcat's intake headlight. But since there isn't a convenient light to cut a hole in, Dodge just put a bigger hole in the grille next to the driver's side headlight. Presumably it leads right to the intake box like the intake on the Challenger. Close examination also reveals that the mesh has changed, as well. The 2019 model's grille has a bit more detail, and the openings are more round than the current model. No other aspects of the updated model have been revealed, but those details should come when the car is fully revealed this summer, along with the new Challenger. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Image Credit: Dodge Dodge Performance Videos Sedan dodge charger srt hellcat


































































































