Dodge Conversion Van on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:

Dodge Demon exorcised by Rhys Millen in new video

When you call your car something like the Demon, it provides plenty of opportunity to play around with the name Í— especially when said car has 840 horsepower directed to the rear wheels. Pennzoil is doing just that in the above video, called "Exorcising the Demon." In it, Rhys Millen tears up the streets of Pittsburgh at night in a black and yellow Dodge Challenger SRT Demon, smoking tires, popping wheelies and breaking the rear end loose in massive drifts around corners. He even pulls a pretty hairy 360. It's certainly a lot different sort of driving from the straight-line drag-strip experience for which the Dodge Demon was purpose-built. At the end of the video, Millen parks the car below a gargoyle, whose eyes briefly glow a menacing red. Millen sends a text message saying "The Demon is back in its place." The response: "Das good. How are you in the Ring?" (Hmm.) Then the clip ends, and we're told the story will be continued. If you don't want to wait for more cinematic Demon action, you can check out Pennzoil's behind-the-scenes video, called, "Unleashing Unprecedented Power." In it, we get to see more angles of the stunt driving, hear about the production, and, of course, get a plug for Pennzoil: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Pennzoil also offers a few other Dodge Demon videos, one about the car's development, one about its performance, and a third focused on Pennzoil Synthetics. Earlier this year, Pennzoil also did a similar video series to bid farewell to the Dodge Viper. Related Video: News Source: Pennzoil Dodge Coupe Performance Videos dodge demon dodge challenger srt demon pennzoil