1998 Dodge Ram 3500 on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

2018 Dodge Durango SRT First Drive | Speed, and space for six

We're gathered along with other members of the media at the Indianapolis Motor Speedway to drive a trio of new vehicles from Dodge's performance arm. Alongside a pair of SRT Challengers – the Demon and the Hellcat Widebody – the 2018 Dodge Durango SRT towers over the coupes, and is surprisingly menacing to behold. Its proportions may be relatively simple, but its hood scoop, air vents, and aero features let us know that this car is built for performance. A set of sporty wheels and bright Brembo brakes reiterate its purpose. A badge on the fender bearing the number "392," denoting the V8's displacement in cubic inches, gets us thinking about classic muscle. Even with the Demon sitting feet away, just looking at the Durango has us excited to drive it. Our first stint in the Durango SRT takes place on the infield road course at Indy. We had just gotten out of the Challenger SRT Hellcat Widebody, driving the same circuit, and we expected the Durango to seem tame by comparison. We were mistaken, mostly. The Durango SRT's seating position feels very upright, particularly due to a helmet that kept us from settling into the headrest. Still, we make ourselves comfortable, able to adjust the steering wheel right where we want it. Everything is in Track Mode – transmission, AWD, suspension, and steering – except for stability control, which is still set to Street. Taking off from behind Indy's famous bricks, throttle tip-in is quick, and the Durango SRT springs to life. The Durango feels fast under wide-open throttle in a straight line, which is impressive consider we had just gotten out of a louder, faster coupe. Dodge claims a 0-60 time of just 4.4 seconds, and it's that kind of acceleration that makes us agree with Dodge's boastful claim that the Durango SRT is a "three-row Charger." Then we take the first corner. The steering feels progressive, if not super tight, but the size and weight of the Durango quickly make themselves known. Body roll reminds us that this is, in fact, a tall utility vehicle, and definitely not a Charger. We lean to the side as the tires dig in, pulling the Durango around its axis and toward the apex of the corner despite the lateral momentum they are fighting. We're hesitant, but the instructor in the passenger seat coaches us to keep on the throttle despite what our inner ear is telling us. The Durango manages to stay stuck to our line as we push harder through the corners than we had thought possible.

2014 Challenger R/T Shaker, Mopar '14 Challenger bring back iconic hood

Enamored of the Dodge Challenger but wish you could get one with a shaker hood? We've got good news, because Dodge and Mopar have teamed up to bring it back.
The 2014 Dodge Challenger R/T Shaker packs the same 5.7-liter Hemi V8 as the standard Challenger R/T, but upgrades the business end with a through-the-hood exposed cold-air intake system. The retro hood scoop protrudes from the center of the hood in satin black (matching the decklid spoiler) to feed the Hemi and shakes with the engine just like the original from 1970. The Shaker model also comes with a Super Track Pak that adds a new steering rack, brake linings, shocks and 20-inch Goodyear Eagle F1 Super Car rubber. You can also shut off the stability management system completely in this car. A series of interior and exterior trim enhancements round out the look. The whole package adds $2,500 to the price of a Challenger R/T Classic for an all-in MSRP of $36,995.
In case that's not enough, Dodge is also offering a limited-edition Mopar Challenger that follows the 2010 Mopar Challenger, 2011 Mopar Charger, 2012 Mopar 300 and 2013 Mopar Dart. Limited to just 100 examples, the 2014 Mopar Challenger gets the same Shaker hood intake, unique graphics and wheels, an enhanced interior and a long list of optional extras from the Mopar parts catalog. Dodge isn't saying just yet how much the Mopar Challenger will cost, but you can bet it will command a considerable premium for the exclusivity alone.