1988 Dodge Ram Conversion Van, Brown/tan, Just Under 93k Miles on 2040-cars

Auto blog

Lee Iacocca's very first Dodge Viper RT/10 nets $285,500 at auction

The first 1992 Dodge Viper RT/10 to roll down the assembly line, which was snapped up by Chrysler chief Lee Iacocca, yesterday hammered at the Bonhams auction in Arizona for $285,500, more than double the pre-sale estimate. According to a history of the car published by the auction house, Iacocca, in his introduction of the Viper to the press, pointed to the car on stage and said, "This one right here is mine." That historic Viper, with serial number 001, has never been available on the open market, as Iacocca kept the car from new until he passed away last year. The car has been driven just 6,200 miles and was being sold by his estate. Other Lee Iacocca cars offered at the same sale fared less well. A 1986 Chrysler LeBaron Town & Country convertible — the ultimate expression of Iacocca's company-saving K-cars — with 20,500 miles on it sold for $19,040. That's less than the $20,000 to $25,000 the auction house had estimated the car would bring. A third car from the former auto executive's estate was a customized 2009 Ford Mustang. The pony car was one of a limited run of 45 Iacocca-branded custom Mustangs, which were reworked by Metalcrafters and sold by Galpin Ford in Los Angeles. The Iacocca Mustang, never titled and with 220 miles on it, hammered for $49,280. Related Video:     Featured Gallery Lee Iacocca's 1992 Dodge Viper RT/10 View 13 Photos Celebrities Chrysler Dodge Auctions Automotive History

FCA updates 700k-vehicle recall to replace ignition switches

FCA US is revising a previously announced recall of 702,578 minivans and SUVs; now specifying that owners replace their ignition switches, rather than just a component. The campaign affects the 2008-2010 Chrysler Town & Country, 2008-2010 Dodge Grand Caravan and 2009-2010 Dodge Journey. The National Highway Traffic Safety Administration initially opened an investigation last summer following complaints about the ignition switches in these models. FCA US (then Chrysler Group) responded with a recall of 695,957 examples of these vehicles because the key could appear to be in the "Run" position but not be fully engaged. If it slipped out, and there was an accident, then the airbags might not deploy. The company had initially planned to install a new detent ring to fix the problem. According to the timeline in a NHTSA document (available here as a PDF), the government agency and FCA US continued their research into the problem. The automaker found that the time needed to create a new ring design and updated software would be longer than replacing the whole ignition switch. The company worked with the supplier Marquardt to negotiate an accelerated schedule to manufacture the extra replacement parts. According to NHTSA, the investigation has now been closed because of FCA's recall. Company spokesperson Eric Mayne confirms to Autoblog via email, "No additional vehicles are affected and all affected customers have already been made aware their vehicles are subject to recall." FCA US sent out an initial notification advising owners of the problem in September 2014. The company will now send out a second letter in April and will replace the parts in two phases. Repairs for affected models from the 2008 and 2009 model years will begin in April, and 2010 examples will start being fixed in August. RECALL Subject : Ignition Switch may Turn Off , 1 INVESTIGATION(S) Report Receipt Date: JUN 26, 2014 NHTSA Campaign Number: 14V373000 Component(s): AIR BAGS , ELECTRICAL SYSTEM Potential Number of Units Affected: 702,578 All Products Associated with this Recall Vehicle Make Model Model Year(s) CHRYSLER TOWN AND COUNTRY 2008-2010 DODGE GRAND CARAVAN 2008-2010 DODGE JOURNEY 2009-2010 Details Manufacturer: Chrysler Group LLC SUMMARY: This defect can affect the safe operation of the airbag system. Until this recall is performed, customers should remove all items from their key rings, leaving only the ignition key.

Stellantis previews 4 electric platforms: Here's how they'll be used

Stellantis EV Day is hitting hard and fast this morning, with big news coming from Dodge and Ram and Jeep and the rest. But to support those brand transformations, a core initiative within Stellantis will help it become a leader in electrification. To do that, the group is developing platforms and technologies with cross-shared components and systems. This starts with four flexible BEV platforms: STLA Small, STLA Medium, STLA Large and STLA Frame. As for targeted numbers, they’re lofty: By 2024, Stellantis aims for over 500 miles of range, 0-62 mph in 2 seconds and charging 200 miles of range in 10 minutes. The four platforms will offer battery capacities from 37 kWh to more than 200 kWh. More specifically, STLA Small will offer 37-82 kWh and up to 300 miles of range. STLA Medium will have 87-104 kWh and up to 440 miles. STLA Large will provide 101-118 kWh and up to 500 miles of range. The truck-focused STLA Frame will provide 159-200+ kWh and up to 500 miles of range (and will support an electric Ram 1500 pickup). Chrysler EV Front 34 View 8 Photos Stellantis has big plans for the STLA Large platform, and is currently developing eight vehicles for it in the next three to five years. Examples of possible vehicles shown include a midsize Ram truck and a Jeep off-roader that could fight against the likes of the Toyota 4Runner. Stellantis design boss Ralph Gilles could be seen in a presentation looking over a Chrysler electric crossover based on this platform. We also saw a Wagoneer badge teased momentarily. There was a rendered silhouette of a crossover that looked like it could compete with the Ford Mustang Mach-E. Gilles said the platform would allow Stellantis to “create a long-range luxury sedan, an all-conquering muscle car, a heart-of-the-market DUV, a heart-of-the-market SUV, a very capable Jeep off-roading white-space opportunity vehicle as well as a new mid-sized truck.” See for yourself in this video starting at the 90-minute mark. As for powertrains, Stellantis is developing three electric drive modules with a shared, scalable inverter, and other common components, as well as in-house software to control them. Those drive units will offer from 70 to 330 kW (94-402 horsepower). More specifically, one EDM will provide 70 kW, a second will provide 125-180 kW, while the most potent can produce 150-330 kW.