Drw Diesel Leather Jake Brake 4x4 Quad Cab Long Bed Nice & Clean Truck Fl on 2040-cars

Auto blog

Dodge recalls 173 Chargers and Challengers for front wheels that don't fit correctly

Dodge is recalling 173 Challengers and Chargers because they’re equipped with an incompatible front wheel and brake package. All the vehicles are 2019 model year cars built between May 28 and September 25 this year, according to the official NHTSA documents. The wheels donÂ’t provide enough clearance from suspension and brake components, Dodge says. ThereÂ’s a chance that the tireÂ’s inner sidewall will make contact with the steering knuckle. When the tire hits the steering knuckle, it could end up damaging the tire, causing a “sudden loss of tire air pressure.” This, of course, is not what you want out of a tire. Predictably, FCA says this could result in a crash without prior warning. To fix the problem, your local Dodge dealer will be installing the wheels that shouldÂ’ve been equipped on the car in the first place. FCA continues: “Also, for customer satisfaction, replace the rear wheels to match the front wheels.” We were wondering if the rear wheels would come into play here, and it looks like Dodge wonÂ’t be leaving anyone out to dry with mismatched front and rear wheels. The wheels in question are described as “Mid Gloss Black Wheel.” Check your window sticker (or wait for the official mailing) to see if you have those wheels on your Charger or Challenger. Unfortunately, FCA doesnÂ’t detail which trims of Charger and Challenger are affected in its recall notice. The company also makes it clear that this recall is due to “an engineering release error” and not a wheel defect. This particular wheel and brake package shouldÂ’ve never been offered as an option from the factory. Look out for a notice in early December, as FCA says it will begin notifying owners around December 13 this year. As of now, there are no reported injuries or accidents due to the issue.

Inner Demon revealed: 840 hp and other jaw-dropping details

After months of teasers, rumors, cryptic messages, and veiled hints, the 2018 Dodge Challenger SRT Demon is finally here, and it's as wonderfully insane as we hoped it would be. Finally we know the facts and figures that Dodge has been hinting at for so long. 840 horsepower. 770 lb-ft of torque. 2.3 seconds to 60 mph. A quarter-mile run of 9.65 @ 140 mph. While pricing hasn't been announced, Dodge is trying to keep it under $100,000. That horsepower figure makes this the most powerful production V8 ever. With those 0-60 and quarter-mile times, it's also NHRA certified as the quickest production car ever. Someone with the means needs to line a Demon up against a Tesla Model S P100D. All that power and all of the Demon's trick launching software and hardware will throw a driver back against their seat with 1.8 Gs. Drivers will be seeing a bit of sky, as the Demon is the first production car to pull a wheelie from a dead stop. Yes, this is all totally and 100 percent street legal. View 48 Photos In order to make all this power, the red-painted supercharged 6.2-liter Hemi V8 has been significantly improved over the Hellcat. It's equipped with a larger 2.7-liter supercharger that turns the boost up to 14.5 psi, redlines at 6,500, and has what Dodge is calling SRT Power Chiller, a system that uses the air conditioning to cool the air coming in through the new Air Grabber hood scoop. In order to keep your engine running time and time again, there is an after-run cooler than cools the supercharger after the car is shut off. The pistons and connecting rods have been strengthened to deal with the higher load. In order to feed enough juice into the engine, the Demon uses dual fuel pumps. We assume that a decent EPA rating wasn't on the top of the engineer's list. Oh, and the Demon can run on 100-octane with the press of a button. With the traditional SRT black and red keys, the Demon actually has three horsepower ratings: 500 with the black key, 808 with the red key, and the full 840 with the red key and 100-octane fuel. Don't worry, even if you have the black key, the Demon will drop the 1/4 mile in 11.59 seconds, still quicker than almost anything around. Most of the rest you already know from the seemingly endless teasers. The Demon wears lightweight wheels with sticky 315/40R18 Nitto drag radials at all four corners.

FCA CEO Mike Manley will take undefined new role after PSA merger

MILAN — Fiat Chrysler Chief Executive Mike Manley will remain with the new group set to result from a planned merger with French rival PSA-Peugeot, Chairman John Elkann said on Wednesday. In a letter to Fiat Chrysler (FCA) employees on the day the two companies announced a binding agreement for a $50 billion tie-up to create the world's fourth-largest carmaker, Elkann said he was "delighted" that the combined group would be led by current PSA CEO Carlos Tavares. "And Mike Manley, who has led FCA with huge energy, commitment and success over the past year, will be there alongside him," he said. He did not say what position Manley would hold. Elkann — who will chair the new group — said there was still much to be done to complete the merger. "Over the coming months we must work tirelessly and determinedly to fulfill all the approval requirements needed to finalize the commitment we have signed," he said. Related Video:     Hirings/Firings/Layoffs Chrysler Dodge Fiat Jeep RAM Citroen Peugeot FCA PSA merger Mike Manley carlos tavares