5.9l I6 Cummins Diesel 6-speed Manual Slt Lone Star Power Seat Tow Gooseneck 4x4 on 2040-cars

Auto blog

Dodge recalls 121,603 examples of Dart for loss of brake assist

Dodge will recall 121,603 worldwide examples of the 2013-2014 Dart with the 2.0- and 2.4-liter engines because of possible loss of power brake assistance. The company reports two minor injuries and seven accidents potentially related to this problem. The affected models have build dates before Jan. 24, 2014. There are 105,458 of these vehicles in the US; 11,996 in Canada; 3,705 in Mexico; and 444 outside of NAFTA. This campaign doesn't affect Darts with the 1.4-liter engine. These vehicles' brake-booster vacuum tube routing can potentially allow oil to access and eventually to degrade the brake booster diaphragm. If this happens, then the vehicles could lose braking assist. The brakes themselves would continue to work, but the driver would experience longer stopping distances. A pop or similar sound of a vacuum leak sometimes precedes the problem, according to the automaker. Dealers will inspect the components and replace the vacuum tube. If technicians find oil in the tube, they'll also swap out the vacuum pump, brake booster, and master cylinder. Affected owners will receive notice from the company within the next 60 days. Statement: Vacuum-tube Assembly December 3, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 105,458 compact sedans in the U.S. to inspect and replace vacuum-tube assemblies and certain other components, as required. Some of the affected vehicles may be subject to oil migration that could affect their brake systems' power-assist feature. Foundation brake function is unaffected. However, if this condition occurs, the driver may notice hard pedal-feel on brake application, and longer distances may be required to stop the vehicle in emergency situations. An FCA US investigation identified certain model-year 2013-14 vehicles equipped with 2.0-liter and 2.4-liter engines, may have brake-booster vacuum-tube routing that inadvertently allows oil to reach the brake booster diaphragm, if ever the vacuum-pump check valve fails. Oil may degrade the diaphragm and lead to a loss of brake-assist – a feature that helps reduce stopping distances. FCA US is aware of two minor injuries and seven accidents that are or may be related to this condition. The recall is limited to model-year 2013-14 Dodge Dart sedans produced before Jan. 24, 2014. It also affects an estimated 11,996 cars in Canada; 3,705 in Mexico and 444 outside the NAFTA region. Vehicles equipped with 1.4-liter engines are excluded.

Redonkulous Dodge Charger is ridin' high

We're a bit hazy on the styling of this particular donk, which was recently spotted hashing about by HotCarsTV at the Southern Heritage Classic Car show in Memphis. Sporting a dope paint job and some wheels that make a blunt statement about what the driver enjoys, it's a unique take on the popular customizing trend.
The owner may be kiefing it real with the theme on this Dodge Charger, but when your car looks like this, it's easy to weed out from the crowd. Chronic police stops must also make it a pain to drive on a regular basis, though. Even with the big wheels, we bet the driver still finds time to light 'em up. Take a look down below for a brief video of this outrageous mean green machine on the road.

2020 Dodge Challenger Drag Pak will debut at SEMA

Mopar fans have countless reasons to get hyped about the 2019 SEMA show. Speedkore is bringing a twin-turbocharged, all-wheel-drive Dodge Charger Hellcat Widebody, Mopar is bringing a done-up 1968 Dodge D200 "Lowliner," Ram is bringing a diesel 1500 overlander, and Jeep is bringing a custom off-road Wrangler. But the launch of the new 2020 Dodge Challenger Drag Pak might garner the most attention from the brand's most serious customers. Prior to the show, Mopar teased a photo and a short video clip, both showing a new Dodge Challenger from the overhead view. The white Challenger showed a wide blue stripe down the center of the car with two pinstripes along each side. "Powered by SRT" runs across the top of the windshield, and Mopar logos grace both sides of the car just beneath the side windows. Red decals run back from the rear quarter panels and connect across the rear of the car. It also has hood pins on the SRT Hellcat hood and a parachute attached the rear. There's a parachute because this is the factory turnkey drag-race-focused Dodge Challenger racecar. Mopar released no other information on what type of hardware the Drag Pak will be using, or what's under the hood, but the video gives a great preview of the exhaust note in full tire-smoke mode. As some Drag Paks in the past have dropped roughly 1,000 pounds from their production starter vehicles, the 2020 model will surely utilize plenty of weight-savings methods such as the removal of all interior comfort features that don't apply on the racetrack. Mopar has also previously altered the position of the engine and changed the wheelbase to the benefit of better weight distribution. Mopar is set to livestream the unveiling starting at 7:26 p.m. ET (that's 4:26 on the West Coast, which not coincidentally coincides the the displacement of the vintage 426 Hemi engine) on Nov. 5, 2019. Until then, check out the 2009, 2010, 2011, or 2016 Drag Paks.