2007 Ram 3500 Slt on 2040-cars

Auto blog

Dodge recalls 2011-2016 Charger to give owners wheel chocks

A bizarre new recall gives wheel chocks to Dodge Charger owners so that people remain safe while changing the sedan's wheels. The campaign covers 441,578 examples of the 2011-2016 Charger in the US; plus 19,229 in Canada; 4,969 in Mexico, and 38,947 outside the NAFTA region. According to Dodge's announcement, owners should use the chocks to stabilize the Charger when using a jack to change the wheels, like in the case of a flat tire. Without them it's possible for the sedan to fall off the jack. The company is aware of three minor hand injuries from this problem. Dodge will notify owners by mail when they can pick up the free wheel chocks. FCA US spokesperson Eric Mayne offered Autoblog a more detailed explanation about this recall. "The body structure of this vehicle is unique. If owner's manual instructions are not followed, slippage may occur. Chocks are being provided to help ensure the instructions are followed," he said. "We are continually analyzing warranty data to identify ways to improve the ownership experience. When tire-jack data was reviewed, we identified a need to further assist our customers." Statement: Wheel Chocks February 3, 2016 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to supply wheel chocks for an estimated 441,578 full-size sedans in the U.S. The chocks are for use, as instructed in the vehicle's owner's manual, when employing a tire jack to change wheels. When positioned diagonally opposite to the wheel being changed, the chocks will help stabilize the vehicle. Failure to follow the manual's instructions with an affected vehicle may cause the vehicle to come off the tire jack. FCA US is aware of three related injuries – all minor. The recall is limited to 2011-2016 Dodge Chargers. Also affected by the campaign are an estimated 19,229 cars in Canada; 4,969 in Mexico and 38,947 outside the NAFTA region. Recall notices will advise affected customers when they may obtain their wheel chocks, which will be supplied free of charge. Customers with questions or concerns may call the FCA US Customer Care Center at 1-800-853-1403.

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

One-of-four carbon fiber-bodied Dodge Challenger Demon listed for sale

Exclusivity often comes at a high price; in this case, it's $169,995. That's how much Texas exotic car dealer BJ Motors is asking for one of the four carbon fiber-bodied Dodge Challenger Demons built by Speedkore. Many enthusiasts would balk at the idea of spending Audi R8 money on a Demon, but this example isn't your average Challenger. Unveiled at the 2017 SEMA show, and upgraded with 1,400 horsepower the following year, the model ditches the standard coupe's metal body panels for carbon fiber parts to lose about 200 pounds. The example offered for sale has six miles on the odometer so odds are no one has verified its quarter-mile time. The dealer noted the Demon in its inventory is the fourth and final carbon fiber-bodied example built. It's fitted with the stock engine, meaning power comes from a supercharged, 6.2-liter V8 engine that delivers 840 horsepower and 770 pound-feet of torque when burning 100-octane race gas, or 808 horsepower and 717 pound-feet of torque when slurping pump gas. It pops a 2.9-foot wheelie as it screams to 60 mph in 2.3 seconds. The person who ordered this Demon new ticked nearly every box on the list of options. It's equipped with heated and cooled front seats, an 18-speaker sound system, plus two-tone leather and Alcantara upholstery. However, as AllPar pointed out, the dealer makes no mention of the Demon Crate, which included skinny front tires, a block-off plate for the passenger-side door mirror, and a conical air filter, among other go-fast goodies. While spending $170,000 on a Dodge Challenger sounds utterly insane, we wouldn't be surprised if this rare example in like-new condition finds a new home quicker than the Demon goes down a drag strip. Dodge made 3,300 units and stock, metal-bodied examples with delivery mileage sold for an average of $143,000 in 2018, according to Hagerty. AllPar learned Speedkore charged $90,000 for the carbon fiber conversion. The equation tilts in favor of the buyer, which suggests the car's next owner may be more of an investor than an enthusiast. If you're more into classics, Speedkore also gave a 1970 Charger the carbon fiber treatment and rounded out the modifications with a 996-horsepower Demon crate engine. Alternatively, if you have a family to haul, the company made a carbon fiber-bodied Charger with 1,525 horsepower at the crank when running 26 pounds of boost. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences.