2007 Dodge Ram 3500 Reg Cab 5.9 Diesel Drw Auto 77k Mi Texas Direct Auto on 2040-cars

Auto blog

Marchionne nixes talk of a reborn Dodge Viper

UPDATE: According to Automobile Magazine's Todd Lassa, FCA chief Sergio Marchionne shot down the idea of a reborn Viper, saying "it's not in the plan." Marchionne was referring to Fiat Chrysler's five-year plan, which we've been covering in bits and pieces as the news filters out. But it's not out of the realm of possibility, apparently, as Marchionne reportedly said he'd be happy to see the reptilian supercar back in production. And it's not all bad news, anyway. A reborn Alfa Romeo 8C will get a carbon-fiber chassis holding a mid-mounted twin-turbo V6. With more than 700 horsepower, including an electrically-driven front axle, the car should hit 62 mph in fewer than 3 seconds. Also, three versions of a Maserati Alfieri will be produced, including a convertible. An electrified all-wheel-drive powertrain is planned. So, performance is coming from FCA, it just may not be from Dodge. View 36 Photos First came the mourning for the Dodge Viper, which ended production last year. Then came the Viper's continued sales run as a "Zombie Car;" we just wrote about how the Viper has racked up 11 sales so far this year, two of them in April. Now Car and Driver reports that the two-seater snake will return shorty for its second encore after being discontinued in 2009. The mag isn't equivocal about it, either, writing, "trust us: A new Viper is happening." It won't, however, be the same Viper that brought ten-cylinder brass knuckles to shake down other coupes for their wallets and jewelry. CD says we should expect the same front-mid-engine layout and rear-wheel drive tucked into a new spaceframe. That engine will lose two cylinders, with Chrysler's next-gen, aluminum-block V8 Hemi slotting into the engine bay. The previous Viper's V10 had grown to 8.4 liters and 640 horsepower by the time it drove into the sunset. CD guesses the coming Viper will start with a naturally-aspirated version of the Hemi V8 working up around 550 horsepower. Healthy doses of aluminum and carbon fiber would restrain the car's weight, on top of the weight loss from swapping an iron V10 for an aluminum V8. SRT could tart up the horsepower with a few performance trims, before a supercharged V8 with 700-plus horsepower arrives at some point after launch. The mag also suspects the initial offering will be a convertible, the hardtop appearing "a few years after launch," which could coincide with the more powerful engine. A row-your-own shifter will sit between the seats.

Stellantis invests more than $100 million in California lithium project

Stellantis said it would invest more than $100 million in California's Controlled Thermal Resources, its latest bet on the direct lithium extraction (DLE) sector amid the global hunt for new sources of the electric vehicle battery metal. The investment by the Chrysler and Jeep parent announced on Thursday comes as the green energy transition and U.S. Inflation Reduction Act have fueled concerns that supplies of lithium and other materials may fall short of strong demand forecasts. DLE technologies vary, but each aims to mechanically filter lithium from salty brine deposits and thus avoid the need for open pit mines or large evaporation ponds, the two most common but environmentally challenging ways to extract the battery metal. Stellantis, which has said half of its fleet will be electric by 2030, also agreed to nearly triple the amount of lithium it will buy from Controlled Thermal, boosting a previous order to 65,000 metric tons annually for at least 10 years, starting in 2027. "This is a significant investment and goes a long way toward developing this key project," Controlled Thermal CEO Rod Colwell said in an interview. The company plans to spend more than $1 billion to separate lithium from superhot geothermal brines extracted from beneath California's Salton Sea after flashing steam off those brines to spin turbines that will produce electricity starting next year. That renewable power is expected to cut the amount of carbon emitted during lithium production. Rival Berkshire Hathaway has struggled to produce lithium from the same area given large concentrations of silica in the brine that can form glass when cooled, clogging pipes. Colwell said a $65 million facility recently installed by Controlled Thermal can remove that silica and other unwanted metals. DLE equipment licensed from Koch Industries would then remove the lithium. "We're very happy with the equipment," he said. "We're going to deliver. There's just no doubt about it." Stellantis CEO Carlos Tavares called the Controlled Thermal partnership "an important step in our care for our customers and our planet as we work to provide clean, safe and affordable mobility." Both companies declined to provide the specific investment amount. Controlled Thermal aims to obtain final permits by October and start construction of a commercial lithium plant soon thereafter, Colwell said. Goldman Sachs is leading the search for additional debt and equity financing, he added.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.