2006 Dodge Ram 3500 Big Horn 4x4 Cummins Diesel Manual Keyless 1 Owner Kchydodge on 2040-cars

Auto blog

Killing the Dart and 200 might lower FCA's fuel economy burden

Killing the Dodge Dart and Chrysler 200 could allow FCA US to take advantage of an intriguing quirk in the next decade's fuel economy regulations. By increasing its ratio of trucks versus cars, the automaker might not need to worry so much about hitting the more stringent efficiency rules. At first thought, it might seem harder for an automaker with a ton of trucks to meet the government's mandated 54.5 mile per gallon corporate average fuel economy for 2025. However, every company doesn't need to hit that lofty figure, according to The Detroit Free Press. The exact target varies by the product mix between trucks and cars. "While passenger car and light truck categories have separate CAFE targets, it's still true that more trucks versus cars in a company lineup means a lower combined CAFE target," Brandon Schoettle, Project Manager Sustainable Worldwide Transportation at the University of Michigan Transportation Research Institute, told Autoblog. "While passenger car and light truck categories have separate CAFE targets, it's still true that more trucks versus cars in a company lineup means a lower combined CAFE target." FCA US' current product blend has 80 percent pickups and CUVs, which means the company stands to benefit from a lower fuel economy target. It might not seem entirely fair environmentally, but this is a great move from a business perspective. The new CAFE rules aren't set in stone, according to The Detroit Free Press, but potentially taking advantage of the regulation is just one more reason to cut the Dart and 200. Modern crossovers also aren't gas guzzlers like older SUVs, which could make it easier to hit the fuel economy target. "Utilities offer practicality and versatility that cars do not, and now, built on car architectures, they do not penalize consumers on fuel economy as they once did," AutoTrader Senior Analyst Michelle Krebs told Autoblog. Schoettle warns that FCA is still making a gamble by killing the small sedans. "Depending on the previous sales volumes and how much these vehicles might have exceeded their specific CAFE targets, it's possible that these cars helped earn CAFE credits for FCA that they could bank for future use," he said. "Future sales breakdowns [car vs.

The 2018 Dodge Demon sounds like nothing else on the road

The Dodge Demon seems to have a torque problem, if making too much to easily contain can be considered a problem. In order to keep all that twist under control, the Demon has a new torque reserve launch system that works all sorts of engineering black magic to build boost without overloading the rear tires and brakes. That system, combined with the sticky Nittos and the fancy new suspension, should lead to some pretty spectacular 60-foot and 1/4-mile times. The way the system works is relatively straightforward. A bypass valve on the supercharger closes, "prefilling" the blower. In order to balance revs and torque, the computer can adjust fuel flow and spark on individual cylinders. The torque reserve kicks in when Launch Mode is initiated and the engine is turning at least 1,000 rpm. The goal is to reach peak boost quicker while efficiently putting down power. The side effect is a distinct exhaust note, which Dodge admits may make it seem like the Demon is broken. That seems to be the root of the "If you know, you know" tagline that the automaker has been using since the first teaser. Those interested can even download a ringtone, which might make it seem like you have a blown-out speaker on your phone. You can get a brief taste in the latest teaser video. In addition to the new info on the Launch Mode, Dodge released a couple of new teaser images. We briefly glimpsed one of these last week. It's a shot of the Demon's performance pages. The number 757 has appeared before, and all the talk of torque leads us to conclude that this is the Demon's torque output. The number 815 was seen in a separate teaser (shown below), which we feel may be the horsepower rating. If those numbers are correct, that would mean an increase of 108 horsepower and 107 lb-ft of torque, totally reasonable numbers given all the Demon's modifications. The license plate photo is another equation or code. This one, 3.9+221=405, is just as cryptic as the others. Look for more news and hints at ifyouknowyouknow.com in the weeks leading to the Demon's reveal. Related Video: Related Gallery Dodge Demon Teasers View 17 Photos Dodge Coupe Performance supercharger dodge demon dodge hellcat

Junkyard Gem: 1963 Dodge Dart two-door sedan

The 1963-1966 Dodge Dart, sibling to the Plymouth Valiant, was sturdy, cheap, and easy to drive, and it sold very well. Here's a worn-but-solid example of the two-door '63 Dart sedan, spotted in a Denver-area self-service wrecking yard. The only transmission choices for the Dart this year were a three-speed manual and an automatic controlled by Chrysler's famous dash-mounted pushbutton shifter. These shifters worked surprisingly well, even when used for road racing. Starting in the 1964 model year, the Dart could be purchased with a 273-cubic-inch V8 engine, but in 1963 Dart buyers had but two engine choices: a slant-6 displacing 170 cubic inches and good for 101 horsepower and a slant-6 displacing 225 cubic inches and making 145 horsepower. This car has the big engine. This is one of the most reliable engines to come out of Detroit, period. The interior is pretty beat, but the metal isn't rusty. You'd think that someone would have rescued this car long before it came to this sorry end, but perhaps Dart restorers only want numbers-matching V8 cars these days. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. "The new kind of compact in the large economy size."