2006 Dodge Ram 3500 6 Speed Manual 5.9l Cummins Diesel Mega Cab Dvd Nerf Bars on 2040-cars

Auto blog

Chrysler extends fuel tank warranties on LX cars, NHTSA ends probe

The National Highway Traffic Safety Administration has ended its investigation of 153,817, 5.7-liter and 6.1-liter Hemi V8-powered 2006 Chrysler 300, Dodge Charger and Dodge Magnum models after reports of stalling. Chrysler has responded by granting a lifetime warranty on the fuel tanks for these vehicles.
NHTSA received 299 reports of engines stalling while the models were stopped or driving at low speeds, and began an investigation. The government agency found that the control valve shutoff float in the V8s' 19-gallon fuel tank could malfunction if the fuel had too high of an ethanol content. In many cases, the valve would break in the open position, allowing the tank to be overfilled, which would then cause the cars to stall. However, there were no accidents reported, and the vehicles could be restarted immediately.
There will not be a recall on these vehicles because, "the condition represents a low risk to motor vehicle safety and is adequately addressed by Chrysler's extended warranty," NHTSA said to The Detroit News.

Mopar Dodge Challenger special edition celebrates a mod decade

Despite the current Dodge Challenger hitting the age of 11 this year, it continues to be a top seller for the brand. One of the reasons for its popularity is its customizability. FCA acknowledges this with the just-revealed, limited-edition Mopar 2019 Dodge Challenger celebrating its factory-backed performance parts and accessories straight from the its own in-house parts division. For 10 years, Challenger owners have benefited from upgrades directly from Chrysler’s Mopar division. This has been a big deal because tuning a car often required aftermarket parts, which could jeopardize factory warranties. But with upgrades directly from original equipment manufacturers, such a risk was eliminated. “Over the last decade, weÂ’ve customized an impressive group of vehicles with exclusive Mopar performance parts and accessories that our enthusiast customers crave,” said Mark Bosanac, head of Mopar Service in a statement. “This year weÂ’re commemorating our tenth Mopar build with another unique and collectible Dodge Challenger, which continues to be the modern muscle car every bit as beloved today as the first-generation vehicle was 50 years ago.” The 2019 Mopar Dodge Challenger starts life as R/T Scat Pack model. Under the hood sits a 392-cubic inch (6.4-liter) Hemi V-8 with 485 horsepower and 475 pound-feet of torque with the choice of a six-speed manual or an eight-speed automatic. But Mopar sweetens the deal by adding a performance cold-air intake, strut tower braces to improve structural rigidity and handling, as well as strut caps and braces painted in silver for eye candy whenever the hood is popped. ItÂ’s only available in two hues, Pitch Black or White Knuckle, and comes with a variety of bespoke interior and exterior upgrades. They include special Mopar Shakedown graphics and blue striping from the front fascia all the way back to the rear decklid spoiler. Completing the look is a set of 20x9-inch forged aluminum wheels wrapped in Goodyear P245/45ZR20 performance tires and the optional shaker hood package made standard. Sales commence next month with a starting price of $45,835.

1968 Dodge D200 'Lowliner' adds low-down diesel torque to a lowrider

When Mopar does a custom classic car, it's always spectacular, whether it's a Dodge muscle car like the 1,000-horsepower Super Charger or the monster Jeep Five-Quarter off-road pickup. For SEMA this year, Mopar skipped another Dodge sports coupe in favor of a 1968 Dodge D200 pickup truck done up as a lowrider, but with a twist. Or more accurately, with lots of twist. Under the gorgeous candy red metallic body is a 5.9-liter 24-valve Cummins turbodiesel straight-six. It makes an estimated 325 horsepower and 610 pound-feet of torque, and it's paired with a six-speed manual transmission. Representatives from Chrysler estimated the weight of the engine and transmission alone at 1,100 pounds. The diesel engine's power goes to the rear wheels, which are 22 inches in diameter and 11 inches wide with fat 325-mm tires. The front wheels are a tad narrower at 9.5 inches. 1968 Dodge D200 View 7 Photos As cool as the powertrain is, the exterior and the interior of the truck can't be ignored. This generation of Dodge pickup is already intriguing with its distinct character line with a little kink at the end and ribbed and louvered hood. These unique styling cues are accented now that Dodge removed various other details from the body such as the door handles, metallic trim and such. The bumpers were also reshaped to better fit the contours of the body, and the front wheels were pushed forward to reduce the long overhang of the stock truck. The bumpers, grille, and "smoothie" style alloy wheels were also painted in a solid cream color rather than chrome, which both accents the deep red body and gives the truck a more workmanlike feel, as low-trim cars typically had painted trim instead of chrome or stainless steel. The red paint also features subtle Cummins logos on the fenders and Dodge block lettering on the tailgate. The interior continues the simple and classy theme. The original bench seat remains, but with saddle brown leather upholstery. Leather trim has been added throughout, and exposed metal parts have been painted in the same color as the exterior. Simple gray cloth floor mats cover the bottom of the cab, and the instrument panel uses new Mopar gauges in a machine-turned metal housing. The original steering wheel remains, but a custom shifter with red Cummins shift knob sticks through the floor.