2006 Dodge 3500 4x4 Slt 6speed Crewcab No Reserve 5.9 Diesel Engine No Reserve on 2040-cars

Auto blog

The 2018 Dodge Demon sounds like nothing else on the road

The Dodge Demon seems to have a torque problem, if making too much to easily contain can be considered a problem. In order to keep all that twist under control, the Demon has a new torque reserve launch system that works all sorts of engineering black magic to build boost without overloading the rear tires and brakes. That system, combined with the sticky Nittos and the fancy new suspension, should lead to some pretty spectacular 60-foot and 1/4-mile times. The way the system works is relatively straightforward. A bypass valve on the supercharger closes, "prefilling" the blower. In order to balance revs and torque, the computer can adjust fuel flow and spark on individual cylinders. The torque reserve kicks in when Launch Mode is initiated and the engine is turning at least 1,000 rpm. The goal is to reach peak boost quicker while efficiently putting down power. The side effect is a distinct exhaust note, which Dodge admits may make it seem like the Demon is broken. That seems to be the root of the "If you know, you know" tagline that the automaker has been using since the first teaser. Those interested can even download a ringtone, which might make it seem like you have a blown-out speaker on your phone. You can get a brief taste in the latest teaser video. In addition to the new info on the Launch Mode, Dodge released a couple of new teaser images. We briefly glimpsed one of these last week. It's a shot of the Demon's performance pages. The number 757 has appeared before, and all the talk of torque leads us to conclude that this is the Demon's torque output. The number 815 was seen in a separate teaser (shown below), which we feel may be the horsepower rating. If those numbers are correct, that would mean an increase of 108 horsepower and 107 lb-ft of torque, totally reasonable numbers given all the Demon's modifications. The license plate photo is another equation or code. This one, 3.9+221=405, is just as cryptic as the others. Look for more news and hints at ifyouknowyouknow.com in the weeks leading to the Demon's reveal. Related Video: Related Gallery Dodge Demon Teasers View 17 Photos Dodge Coupe Performance supercharger dodge demon dodge hellcat

It ain't easy keeping a Hellcat steady at 170 mph on ice

The Dodge Challenger SRT Hellcat you see hit the ice at Arsunda Speed Weekend in Sweden, over two hours north of Stockholm. It's said to be bone stock, save for the studded tires that help it grip on ice. But it apparently takes more than some steel studs and a lead foot to keep it pointed the right way. Just look at how much driver Alx Danielsson has to saw at the wheel to keep the Hellcat from veering off course. Fortunately he seems to have the chops to do so, being not only a native of Sweden (and therefor imbued from birth with otherworldly abilities to drive on ice) but also having won the highly competitive Formula Renault 3.5 Series championship back in 2006. In the end Danielsson hit a top speed in excess of 170 miles per hour, touted as some sort of record, however unofficial (and specific to Dodge Challengers). That's a fair bit shy of the 205 mph that Bentley achieved in the Continental Supersports, but while that model had slightly less power than the Hellcat, it did have the benefit of all-wheel drive – something that could make all the difference in these kinds of slippery conditions. Related Video:

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric