2002 Dodge Ram 3500 4x4 -- 5.9 Cummins Ho Diesel -- 6 Speed - Great Condition!!! on 2040-cars

Auto blog

Chrysler Recalling Nearly 907,000 Cars, SUVs

Nearly 907,000 Chrysler, Dodge and Jeep SUVs and cars are being recalled for alternators that can fail and heated power mirror wiring that can short and cause minor fires. The recalls, posted Thursday by U.S. safety regulators, push the total number of recalls so far this year 544, totaling a record of more than 52 million vehicles. The largest of Thursday's recalls covers nearly 470,000 Jeep Grand Cherokees, Chrysler 300s, and Dodge Chargers, Challengers and Durangos from the 2011 through 2014 model years. The alternators can fail, causing the 3.6-liter V6 engines to stall unexpectedly. The problem also can cause the electrical system to fail, as well as knock out power-assisted steering, antilock brakes and electronic stability control. It can even cause fire or smoke, according to documents Chrysler filed with the U.S. National Highway Traffic Safety Administration. NHTSA opened an investigation into the problem in July, and Chrysler began its own probe in August. The company analyzed warranty complaints and alternators that had failed. The alternator generates electricity to recharge the battery and run other devices. Chrysler investigators traced the problem to heat fatigue in an alternator diode. Chrysler said it received 322 complaints about the problem, while 55 people complained to NHTSA. The company said it knows of one crash related to the problem, but no injuries or fires. The company will replace the alternators with upgraded versions for free. Owners will be notified in November. The company says customers who see warning lights or suspect a problem should contact their dealers. The recall affects cars and SUVs sold mainly in the U.S. and Canada, but some were sold in Mexico and overseas markets. The second recall covers almost 437,000 Jeep Wranglers from 2011 through 2013. Water can find its way into the heated power mirror wiring harness and cause corrosion. That can cause a short and could cause a minor fire and smoke, as well as cause loss of function of the mirror. The problem was discovered in February after three Wranglers in Canada were damaged. Chrysler says it has 26 complaints about the problem, but it knows of no fires, crashes or injuries. Dealers will move the wiring and install a protective shield to keep water out at no cost to owners, starting in December. Most of the Wranglers are in the U.S., Canada and Mexico, but more than 78,000 were sold overseas.

1979 Dodge Li'l Red Express in Generation Gap showdown with 1933 Ford Pickup

Auto enthusiasts love a good debate, whether it's Mustang versus Camaro or Ferrari against Lamborghini. But how about a battle between two very different vintages of classic pickup trucks? In this case, the fight is between a 1979 Dodge Li'l Red Express and a 1933 Ford Model 46 truck with a flathead V8.
The shootout comes courtesy of the internet series Generation Gap, and its concept is super-simple. One guy prefers classics, and the other likes newer rides. They choose a category, pick two vehicles and put them head to head. In this case, neither is exactly modern, though. The Ford is more than old enough to receive Social Security checks, and the Dodge is hardly a young whippersnapper.
Other than both being pickups, these two models were made to serve very different functions. The Li'l Red Express was basically the progenitor of today's muscle trucks, with a big V8 that made it one of the quickest new models in its day (admittedly, 1979 was a rough time for automotive performance). On the other hand, the '33 Ford was just meant to work, with little pretense for anything else. One of the hosts describes it as "the simplest, most difficult" vehicle he's driven because of the tricky double clutchwork necessary to shift gears. Scroll down to watch the video and try to decide which of these two American classics you would rather have in your garage.

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.