2002 Dodge Diesel 3500 Rwd Laramie Slt Dually on 2040-cars

Auto blog

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Dodge recalls 2011-2016 Charger to give owners wheel chocks

A bizarre new recall gives wheel chocks to Dodge Charger owners so that people remain safe while changing the sedan's wheels. The campaign covers 441,578 examples of the 2011-2016 Charger in the US; plus 19,229 in Canada; 4,969 in Mexico, and 38,947 outside the NAFTA region. According to Dodge's announcement, owners should use the chocks to stabilize the Charger when using a jack to change the wheels, like in the case of a flat tire. Without them it's possible for the sedan to fall off the jack. The company is aware of three minor hand injuries from this problem. Dodge will notify owners by mail when they can pick up the free wheel chocks. FCA US spokesperson Eric Mayne offered Autoblog a more detailed explanation about this recall. "The body structure of this vehicle is unique. If owner's manual instructions are not followed, slippage may occur. Chocks are being provided to help ensure the instructions are followed," he said. "We are continually analyzing warranty data to identify ways to improve the ownership experience. When tire-jack data was reviewed, we identified a need to further assist our customers." Statement: Wheel Chocks February 3, 2016 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to supply wheel chocks for an estimated 441,578 full-size sedans in the U.S. The chocks are for use, as instructed in the vehicle's owner's manual, when employing a tire jack to change wheels. When positioned diagonally opposite to the wheel being changed, the chocks will help stabilize the vehicle. Failure to follow the manual's instructions with an affected vehicle may cause the vehicle to come off the tire jack. FCA US is aware of three related injuries – all minor. The recall is limited to 2011-2016 Dodge Chargers. Also affected by the campaign are an estimated 19,229 cars in Canada; 4,969 in Mexico and 38,947 outside the NAFTA region. Recall notices will advise affected customers when they may obtain their wheel chocks, which will be supplied free of charge. Customers with questions or concerns may call the FCA US Customer Care Center at 1-800-853-1403.

The first production 1992 Dodge Viper RT/10 is up for grabs

The 1992 Dodge Viper RT/10 was a game-changer both for parent company Chrysler and the U.S. auto industry at large. While it was significant for bringing its automaker out of its dull, post-1980s funk, it also lit a fire under the rest of Detroit. If it hadn't been for the Viper, the world may not have gotten the C5 Chevrolet Corvette Z06 (and its many world-class successors) or the revived Ford GT.  And the very first one is headed to auction.  This Viper is particularly special for two reasons. Not only was it the first production RT/10 to roll off the line at Chrysler's Mack Avenue plant (the Viper wouldn't move to Conner Avenue Assembly until 1996), but it was immediately scooped up by industry icon and then-Chrysler executive Lee Iacocca, who famously ushered fellow great Bob Lutz on stage at the Viper concept's reveal and told him to "build the damn thing." Even if you've never heard of Iacocca, you're certainly familiar with the cars he's influenced, whether you know it or not. Whether it's the Chrysler K-Car platform (and the minivan segment it spawned) or the 1964 Ford Mustang, one of Iacocca's projects has undoubtedly touched your life in one way or another.  Showing just over 6,200 miles, this Viper remained in Iacocca's possession from day one until his passing in 2019. Even without the Iacocca connection, this would be a special lot. VIN #001 is all-original, packing the 8.0-liter V10 engine that made the Viper famous. Dodge's bruiser was also known for being light on superfluous extras, such as anti-lock brakes, which the Viper didn't receive until 2001 — just before the second-generation model was discontinued.  Bonhams projects this Viper will go for between $100,000 and $125,000. That's probably a bargain. Opportunities to own such a unique and significant piece of automotive history come around very rarely, and considering this is about the same amount FCA was charging for a brand-new Viper when it went out production in 2017, it's not an unreasonable price point.  The Viper will cross the block on Jan. 16.