1999 Dodge Ram 3500 Ext, Cab 4x4 Cummins Diesel, Quad Doors, Slt Laramie, Video on 2040-cars

Auto blog

Dodge Durango Hellcat teased in 'Fast and Furious' spot is real, headed to New York

The Durango Hellcat teased in a Dodge commercial appears to be the real deal, according to a report that surfaced Monday afternoon, and we could see it as soon as the New York International Auto Show in April. The horsepower Gods are smiling upon us.  Motor Authority says that a Dodge insider was able to confirm the existence of a Durango Hellcat, and suggested it will make its public debut at the New York show this spring. "Hellcat all the things" has become a bit of a meme, and it appears Dodge is either in on the joke, non-ironically committed to the concept, or maybe a little bit of both. A commercial FCA debuted to coincide with the release of the trailer of the latest "Fast and Furious" film gave us our first brief glimpse the new supercharged Durango SUV. Credit for the original find goes to the fine (and eagle-eyed) folks at Road & Track, who spotted the fender badge at approximately the 17-second mark in the embedded commercial. The tease left little to the imagination. The badge is shown prominently on the fender of the mystery vehicle, which isn't much of a mystery at all. It's a Dodge and it's not a Charger or Challenger; no need to overthink it.  Immediately after, the camera cuts to what is obviously a Durango silhouette, but we can't see a whole lot in the glare of its headlights.  It also makes sense from a product cycle perspective, as the Durango is well past the point where it has received its AARP card and we're not necessarily expecting a replacement. The three-row slot in FCA's lineup may go exclusively to Jeep once all is said and done.  We know (or have heard rumors) that other variants of the family SUV are in the pipeline, making it clear that FCA plans to milk the aging three-row for all it's worth. The Jeep Grand Cherokee, which rides on the same fundamental platform but with a shortened wheelbase, has already gotten the Hellcat treatment in the Trackhawk, so porting this engine over for three-row duty should be a snap.  More importantly, a mild facelift may accompany other updates to the Durango, which would conveniently explain why Dodge obscured the Durango's front end in the teaser.  If there's any downside to this, it's that FCA is going to run out of vehicles eventually. With the Ram Rebel TRX well underway and now this, there just aren't many vehicles left in FCA's various brand lineups that can physically accommodate a supercharged, 6.2-liter V8.  Hopefully they have Sawzalls. Related Video:    

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge PHEV due in 2022 expected to be the Hornet

A relatively new saga involving hornets in the Pacific Northwest begins with the adjective "murder" and gets worse from there. A relatively dated saga involving hornets in the automotive industry begins with the name "Dodge" and is — or could be — much friendlier to plant and animal life. Last year, former Dodge parent company Fiat Chrysler trademarked the term "Dodge Hornet" for the first time. Two months ago, an Italian publication credited its sources with news that current parent company Stellantis will create a Dodge version of the Alfa Romeo Tonale (pictured) and call it the Hornet. Now, Mopar Insiders picked up on Stellantis CEO Carlos Tavares sharing a roadmap of the 20 PHEV and battery-electric vehicles coming our way in the next two years between the company's 14 brands. Dodge merits a single PHEV entry in the 2022 column. MI says this will be the Hornet.      As FCA recast its U.S. lineups to give Dodge more focus and give Chrysler a reason to exist, Dodge lost the Caliber, Nitro, and Journey. The way this new report is put, and as we mused a year ago, the coming Hornet will replace the Journey — a space Dodge could do well to return to. Never given much love by the parent company, the Journey turned into a hoary old thing over its 13 years on the market, but sold in remarkable numbers to the end. According to Car Sales Base, sales increased nearly every year for the first nine years of the Journey's life. Even during the sales decline over the last four years of its production life, the Journey found 298,594 homes in the U.S. More than 12,000 zombie units have been moved off lots this year. A Dodge Hornet likely wouldn't offer the Wal-Mart rollback pricing the Journey was known for. Also, the Hornet would pack in just two rows, whereas the Journey offered three. Nevertheless, we're now talking about three vehicles sharing major internal organs; the Alfa Romeo Tonale leans heavily on the Jeep Compass platform and internals, and the Dodge is expected to be built at the same Naples, Italy plant as the Alfa Romeo. The economies of scale are there. As for powertrain, we know there's a Tonale PHEV coming, but it's thought to get its plug-in system from the Jeep Renegade 4xe that's based around the smaller 1.3-liter four-cylinder with either 190 or 240 total horsepower instead of the larger 2.0-liter engine in the Wrangler 4xe.