1998 Extended Cab, 4x4, V 10 Engine,5 Speed Trans. 218000 Miles on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

eBay Find of the Day: 1994 Dodge Viper RT/10 with 504 miles

It's typically hard to find early examples of the Dodge Viper that haven't been crashed or modified, but one eBay seller has a showroom-fresh version of the V10 roadster up for sale worthy of an eBay Find of the Day.
With just 504 miles on the odometer (according to the description and not the images) and "no defects at all," this 1994 Viper is a rare find indeed. Tack on the Buy It Now price of just $37,500 and it seems like a steal - especially when checking out the prices and conditions of other early Vipers currently listed on eBay.
Even after spending months ogling the all-new 2014 SRT Viper, it's hard to ignore the raw beauty of the original open-top model. From the three-spoke wheels to the calf-searing side pipes, everything about this Viper looks just the way it did when it rolled off the line almost 20 years ago. The seller even says that the top and windows have never been installed meaning there are no scratches anywhere on this car!

1968 Dodge D200 'Lowliner' adds low-down diesel torque to a lowrider

When Mopar does a custom classic car, it's always spectacular, whether it's a Dodge muscle car like the 1,000-horsepower Super Charger or the monster Jeep Five-Quarter off-road pickup. For SEMA this year, Mopar skipped another Dodge sports coupe in favor of a 1968 Dodge D200 pickup truck done up as a lowrider, but with a twist. Or more accurately, with lots of twist. Under the gorgeous candy red metallic body is a 5.9-liter 24-valve Cummins turbodiesel straight-six. It makes an estimated 325 horsepower and 610 pound-feet of torque, and it's paired with a six-speed manual transmission. Representatives from Chrysler estimated the weight of the engine and transmission alone at 1,100 pounds. The diesel engine's power goes to the rear wheels, which are 22 inches in diameter and 11 inches wide with fat 325-mm tires. The front wheels are a tad narrower at 9.5 inches. 1968 Dodge D200 View 7 Photos As cool as the powertrain is, the exterior and the interior of the truck can't be ignored. This generation of Dodge pickup is already intriguing with its distinct character line with a little kink at the end and ribbed and louvered hood. These unique styling cues are accented now that Dodge removed various other details from the body such as the door handles, metallic trim and such. The bumpers were also reshaped to better fit the contours of the body, and the front wheels were pushed forward to reduce the long overhang of the stock truck. The bumpers, grille, and "smoothie" style alloy wheels were also painted in a solid cream color rather than chrome, which both accents the deep red body and gives the truck a more workmanlike feel, as low-trim cars typically had painted trim instead of chrome or stainless steel. The red paint also features subtle Cummins logos on the fenders and Dodge block lettering on the tailgate. The interior continues the simple and classy theme. The original bench seat remains, but with saddle brown leather upholstery. Leather trim has been added throughout, and exposed metal parts have been painted in the same color as the exterior. Simple gray cloth floor mats cover the bottom of the cab, and the instrument panel uses new Mopar gauges in a machine-turned metal housing. The original steering wheel remains, but a custom shifter with red Cummins shift knob sticks through the floor.