Low Mileage Ram 2500 Slt Quad Cab A/c Cruise 5.9l Cummins Diesel 4x4 Long Bed! on 2040-cars

Auto blog

2016 Dodge Viper ACR First Drive [w/video]

The Dodge Viper is not a comfortable car. Livable, yes. The interior is covered in fine materials. But you still climb over a hot door sill to enter the tiny cabin. And the frequency range of the engine's noises seem specifically designed to cause headaches. What happens, then, if you remove all pretense of civility from a Viper and add equipment solely aimed at improving lap times? You would have the 2016 Dodge Viper ACR. In terms of achieving its purpose, this car is a absolute success. In many ways it's also the most honest Viper of the current generation. Prices start at $121,990 (including $2,100 gas-guzzler tax and $1,995 destination), or $32,900 more than the least expensive Viper. In ACR trim, the Viper loses the under-carpet padding, 9 of 12 speakers plus amplifier, carpet and trim from the cargo area, and sound deadening in front of the rear wheel wells. The parts of the interior still covered add healthy amounts of Alcantara or optional carbon fiber. That weight loss is compensated by the addition of go-fast bits like the giant rear wing (or the larger "x-wing" on the Extreme Aero Package), 10-way adjustable Bilstein Motorsports shocks, Brembo carbon-ceramic brakes, a rear diffuser, and a front splitter. Total claimed curb weight is 3,392 pounds in Aero trim (standard ACR trim is 18 pounds lighter), which is within a few stone of the rest of the Viper lineup. The diffuser strakes and leading edge of the splitter are removable, made to be replaced after rubbing on track tarmac and make street driving slightly more practical. Not that you'd want to drive the ACR on the street, with the lack of noise insulation and spring rates twice as stiff as the Viper TA, but it is street-legal. Dodge claims the DOT-approved Kumho Ecsta V720 tires on the ACR allow faster lap times than some race compound tires. Our test was limited to on-track shenanigans at Virginia International Raceway. Which is fitting because we wouldn't have anything good to say about driving the car on the street. The ACR is, essentially, a race car sold in the showroom, although with the Viper's 1 of 1 customization program, your custom build can include as many creature comforts as you like. Lined up in pit lane at VIR, the Viper ACRs for our evaluation blur the air with heat shimmer. All of the test cars have air conditioning, but that shuts off at full throttle with a six-second reset.

This Dodge Challenger was stolen, used in police chases and recovered all in the week before its SEMA debut

Most of the drama in a SEMA build is in getting the car ready in time for the big show. That was all Quintin Bros Auto and Performance was expecting when they built a supercharged Dodge Challenger Scat Pack with custom carbon fiber body parts, aftermarket wheels and upgraded brakes. But unfortunately, a bigger drama happened in the week leading up to the show. And it was the worst kind. As part owner Pete Quintin told us, the car was shipped out in a small trailer, and while the delivery driver was spending the Monday night a week before the show at a hotel, a thief showed up in a stolen pickup and made off with the trailer and the car. It wasn't an easy task, either, as the delivery driver had parked the trailer in with the truck blocking it. The thief used his own (well, not his own, but you know what we mean) truck to shove the trailer hitch out where he could access it, then hooked it up and took off. Several miles down the road, he parked, opened up the trailer and vanished in the Challenger. The following morning, the delivery driver discovered the theft, and Quintin Bros immediately informed the owner so that a police report could be filed and a search could begin. The trailer was found not too long after, thanks to someone who was following the story on social media. But obviously the car was missing. Folks on social media were also helpful in tracking the car, in addition to the help of the Las Vegas Police Department (LVPD). What followed was a week of chasing the car down. Twice the car was found in parking garages, Quintin said, and both discoveries resulted in police chases. The second chase was the most dramatic, with a police officer stopping after noticing the car. The thief was in it, and he bolted upon seeing the officer. He powered the Challenger right through the nose of the police car, damaging both. The chase culminated on the highway, where Quintin told us 14 cars were in pursuit, and the thief got up to 150 mph. Police ended up calling off the chase because of the danger. But the car was damaged enough that the thief eventually abandoned it at one last garage, where it was picked up on Thursday. Once the car was recovered, things gradually began looking up for the Quintin family. Pete Quintin said that as soon as LVPD found out the Challenger was meant to go to SEMA, the department got the car out of evidence impound as fast as it could so the shop could show off the beat-up car.

Dodge idles Viper production again at Conner Avenue

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.